-
File Transfer speeds very low
Do you have any recommendations for what I can try? Maybe the cable is still needs replacing?
-
File Transfer speeds very low
Results after cable re-seating. [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 29.6 MBytes 248 Mbits/sec [ 4] 1.00-2.00 sec 30.5 MBytes 256 Mbits/sec [ 4] 2.00-3.01 sec 30.8 MBytes 257 Mbits/sec [ 4] 3.01-4.01 sec 30.5 MBytes 256 Mbits/sec [ 4] 4.01-5.00 sec 30.0 MBytes 253 Mbits/sec [ 4] 5.00-6.01 sec 30.5 MBytes 254 Mbits/sec [ 4] 6.01-7.01 sec 30.8 MBytes 258 Mbits/sec [ 4] 7.01-8.01 sec 30.5 MBytes 256 Mbits/sec [ 4] 8.01-9.01 sec 30.5 MBytes 256 Mbits/sec [ 4] 9.01-10.00 sec 30.5 MBytes 256 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 304 MBytes 255 Mbits/sec sender [ 4] 0.00-10.00 sec 304 MBytes 255 Mbits/sec receiver
-
File Transfer speeds very low
I feel silly. Loose cable was the issue.
-
File Transfer speeds very low
Just took a look at my networking and it says that it's running eth1 at 100Mbps, but I don't know why.
-
File Transfer speeds very low
My current setup is as follows: Router: ASUS RT-AX58U Desktop PC: Intel I225V 2.5G (Intel Z490 Chipset) Unraid: Intel I219V (Intel H570 Chipset) All gigabit capable.
-
File Transfer speeds very low
Test 1 (Unraid as receiver, Destop as sender) iperf3 -c unraid.server.ip Connecting to host unraid.server.ip, port 5201 [ 4] local desktop.pc.ip port 51682 connected to unraid.server.ip port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.01 sec 2.88 MBytes 24.0 Mbits/sec [ 4] 1.01-2.00 sec 2.62 MBytes 22.2 Mbits/sec [ 4] 2.00-3.01 sec 2.75 MBytes 22.9 Mbits/sec [ 4] 3.01-4.01 sec 2.62 MBytes 22.1 Mbits/sec [ 4] 4.01-5.00 sec 2.75 MBytes 23.1 Mbits/sec [ 4] 5.00-6.01 sec 2.62 MBytes 21.8 Mbits/sec [ 4] 6.01-7.00 sec 2.75 MBytes 23.3 Mbits/sec [ 4] 7.00-8.00 sec 2.62 MBytes 22.0 Mbits/sec [ 4] 8.00-9.01 sec 2.62 MBytes 21.9 Mbits/sec [ 4] 9.01-10.00 sec 2.62 MBytes 22.1 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 26.9 MBytes 22.5 Mbits/sec sender [ 4] 0.00-10.00 sec 26.8 MBytes 22.5 Mbits/sec receiver Test 2 (Desktop as receiver, Unraid as sender) iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from unraid.server.ip, port 45770 [ 5] local desktop.pc.ip port 5201 connected to unraid.server.ip port 45772 [ ID] Interval Transfer Bandwidth [ 5] 0.00-1.00 sec 9.59 MBytes 80.1 Mbits/sec [ 5] 1.00-2.00 sec 9.84 MBytes 82.6 Mbits/sec [ 5] 2.00-3.00 sec 10.0 MBytes 84.2 Mbits/sec [ 5] 3.00-4.00 sec 9.61 MBytes 80.4 Mbits/sec [ 5] 4.00-5.00 sec 9.66 MBytes 81.0 Mbits/sec [ 5] 5.00-6.00 sec 9.88 MBytes 83.2 Mbits/sec [ 5] 6.00-7.00 sec 9.82 MBytes 82.1 Mbits/sec [ 5] 7.00-8.00 sec 9.84 MBytes 82.6 Mbits/sec [ 5] 8.00-9.00 sec 10.3 MBytes 86.4 Mbits/sec [ 5] 9.00-10.00 sec 10.1 MBytes 84.5 Mbits/sec [ 5] 10.00-10.00 sec 0.00 Bytes 0.00 bits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 5] 0.00-10.00 sec 0.00 Bytes 0.00 bits/sec sender [ 5] 0.00-10.00 sec 98.6 MBytes 82.7 Mbits/sec receiver
-
lightsource started following Out Of Memory errors detected on your server and File Transfer speeds very low
-
File Transfer speeds very low
I'm currently having issues with file transfer speeds using unraid. It seems as though this began happening after I converted a bunch of videos to x265 utilizing tdarr. Currently on windows my file transfers sit around 2-3MB/s, so a 4GB file is 20+ minutes. I was encoding for about 4 days and on one of the days I did get notified of ~52 errors on my parity drive. I conducted some disk speed tests with DiskSpeed and the 12TB HDD’s scored very similar, one of the 12TB’s was the parity drives. So no issues there. I don’t know if this was the best approach to take, but any guidance would be greatly appreciated. Thanks
-
Out Of Memory errors detected on your server
Hello, I'm currently getting the following error messages from Fix Common Problems Out Of Memory errors detected on your server - Your server has run out of memory, and processes (potentially required) are being killed off. You should post your diagnostics and ask for assistance on the Unraid forums Attached are diagnostics. Any help would be greatly appreciated! tower-diagnostics-20220821-1657.zip