throesch

yea it would reset every reboot. I ended up getting a pikvm and tailscales for remote reboot. But now i run into LSI 9300-16I throwing some Chinese characters after listing all HDDs. then the bios says go to setup and freezes. to fix I have to manually unplug the "TOP" connector let it boot all the way around till it says press F1 to enter setup. press F10. save and reboot. power off machine. plug top connector back in and boot up. Random after any power cycle. Things I've tried: Moved 9300 to every other PCI-E slot except top for GPU Moved Connectors around. swapped all Cables out just when i thought i got it nope came back. bought a 9305 24 to see if that goes away.

I'm reaching out as i have tried everything i can think of to get WOL to work with this motherboard. motherboard: WS C422 SAGE/10G Bios version : 4108 Ram: 64 GiB DDR4 Single-bit ECC 2133 CPU: Intel® Xeon® W-2255 Processor HBA card: LSI 9300-16I firmware version 16.00.14.00 CMOS batter : new (bios holds settings) Bios settings attempted: Network stack : enabled | both 10g nicks : WOL enabled. | APM Pci-E: enabled Network stack : disabled | both 10g nicks : WOL enabled. No mater what i do when i power down server and try WOL nothing happens. then when i go to bios WOL is disabled. all other settings stayed as i set them I even followed: https://www.asus.com/us/support/faq/1045950/ any help it would be much apricated.