IsSidha

Had the same issue, no shares to be seen and clicking add share only gave a blank page After disabling the adblocker in Safari it now shows the shares and am able to add a share again

one thing that works for me with all dockers set /config = /mnt/cache/dockerapps/(name of docker) set /media = /mnt/user ignore all other directories it's asking for now you can simply use the entire storage from /media make sure the settings of the programs itself are pointing to valid directories then so far only SickBeard can't hold the default directory after a reboot for some strange reason

did a completely new installation.. all works out of the box again thanks PhAzE!

oh, and ps... Sonarr is awesome!! being surprised is an understatement!! got a bit fed-up with SickRage as well and SickBeard wasn't exactly doing what i wanted from it

Solved... so i copied SABnzbd-0.7.20-src.tar.gz from github and renamed it Sabnzbd-PhAzE-0.7.20-src.tar.gz inside the /boot/config/plugin/Sabnzbd folder and with fingers crossed pressed install from the settings page.. so it wasn't picking up the source file from SABnzbd itself

it is a new install (again) but it didn't solve the problem something got moved around somewhere i think usr/bin/tail -n 42 -f /var/log/PhAzE-Logs/Sabnzbd.log 2015-12-24 18:55:29 [iNFO] ************************** 2015-12-24 18:55:29 [iNFO] Installing Sabnzbd plugin 2015-12-24 18:55:29 [iNFO] ************************** 2015-12-24 18:55:29 [iNFO] Checking for current bundle files 2015-12-24 18:55:29 [iNFO] Control file: Not Found 2015-12-24 18:55:29 [iNFO] Dependency file: Not found 2015-12-24 18:55:29 [iNFO] Check OK! 2015-12-24 18:55:30 [iNFO] Downloading new control file 2015-12-24 18:55:31 [iNFO] Download OK: Control file passed MD5 check 2015-12-24 18:55:31 [iNFO] Downloading new dependency file 2015-12-24 18:55:40 [iNFO] Download OK: Dependency file passed MD5 check 2015-12-24 18:55:40 [iNFO] Locating and removing old bundle files 2015-12-24 18:55:40 [iNFO] Running install script for SABnzbd 2015-12-24 18:55:40 [iNFO] Verifying plugin config file elements 2015-12-24 18:55:40 [iNFO] Verification OK! 2015-12-24 18:55:40 [iNFO] Installing control file 2015-12-24 18:55:40 [iNFO] Control file install OK! 2015-12-24 18:55:40 [iNFO] Removing Windows carriage characters from important files 2015-12-24 18:55:40 [iNFO] Cleaning up temp files and folders 2015-12-24 18:55:40 [iNFO] ************************** 2015-12-24 18:55:40 [iNFO] Install complete! 2015-12-24 18:55:40 [iNFO] ************************** 2015-12-24 18:55:56 [iNFO] *** Start Initiated *** 2015-12-24 18:55:56 [iNFO] Installing SABnzbd... 2015-12-24 18:55:57 [iNFO] Updating dependencies 2015-12-24 18:55:57 [iNFO] Dependency install file has correct MD5 2015-12-24 18:55:57 [iNFO] Using /mnt/cache/.PhAzE-Common for dependency directory 2015-12-24 18:56:00 [iNFO] Dependencies updated successfully 2015-12-24 18:56:00 [iNFO] Updating export file 2015-12-24 18:56:00 [iNFO] Updating shorcut file 2015-12-24 18:56:00 [WARNING] Unable to get latest version from online - Checking USB for any install file 2015-12-24 18:56:00 [ERROR] Install failed: Install file missing

seems to be something going on with SABnzbd.. it can't find the install files? the folder .PhAzE-Common/Sabnzbd remains empty as well

can't add a user either.. running 6.1.3 there is no error or anything so my guess it's the page that makes the booboo.. as in, not doing what it's supposed to do otherwise, no clue as none is given in log/error files.. worked before in 6.1.0 guess i'll downgrade then to a previous version

Hey BH.. i have been using several of your dockers now for a while and they have been great and worked like a charm (unlike a lot of the others).. but it's not the right path for me as i make way to many changes to them and then loose it all with the next update and i am too lazy to start messing around to create my own so i am very happy to see a ready made VM from you as a starting point.. yay!!

you can't use port 80.. it is taken by unraid to display it's interface use port 90 or 81 or 8080 or whatever you fancy.. just not 80, effa to be complete... you leave the container port on 80, but the host port is something else.. when calling the page you must use the host port.. as in 127.0.0.1:90

very weird thing.... my cache drive showed as unformatted at every reboot (2 drives).. after formatting it works well until reboot after another reboot and again an unformatted cache drive i decided to do a "new config" and reassign the drives after reassigning the drives they were no longer unformatted and the data was present after another reboot the docker was alive and the apps running :o

you can't create a share when the array is stopped the array is the place where the share gets created but when you are trying to recreate your system with a fresh flash drive there is only one thing you need to do make sure which drive is used for parity and which for cache.. make a picture with your cellphone of the array screen(!!).. then just forget about all the cfg files and what not, most of it is pretty basic anyway.. don't put any plugins or other programs there.. boot up, make the changes to the default settings if you wish, recreate the array form your cellphone picture, and all is working again.. only then start adding as little as possible plugins etc to your system.. there are a few settings you may have to change but since these apps are on the cache drive anyway it's never more then just a few clicks it gets even more frustrating when you find out you are following some outdated instructions... for all others.. here is the new one http://lime-technology.com/unraid-server-installation/

i doubt firefox is it.. i used both firefox and safari.. neither did showed it properly i was thinking maybe some other plugin or tool got in the way.. as i have been messin about with it.. so this morning i started with a clean flash again and all works did put some essential plugins to it.. still works well perhaps at some point (couple of days) it needs to read too much data or gets purged?? will keep an eye on it UPDATE: running for 3 days now, still going well.. not sure what the problem was

for me it is the other stats screen actually that stopped working everything else is looking and working just peachy as you can see it has been running for 3 days but no info whatsover.. the only thing that does work is setting to real time system stats is 2.1.2 and webgui is 2.2.3 while i'm at it anyway.. could we get the button with changes before we update? that would make quite a bit more sense in my world

the web standards you refer to are web standards for commercial websites serving 1000's of users an hour this is an interface for 1 or maybe 2 persons to view at once a week or so so who cares it has tables and uses 50kb extra

yeah.. get rid of the tabs!!!! it's not 2008 anymore!!

i should have known that an hour ago.. would have saved me some time from using dd and fdisk as i was about to install plex, using my newly created data drive, i will follow this guide and report back edit: i am actually thinking that it would not be nessecarry when you mount that data drive to /opt.. yeah, lazy i know edit2: first attempt didn't work very well there is no "Plug-in Support" directory created it is a permission problem that keeps popping up, it is creating files as plex and as root, but plex has no access to those root files it seems

oh.. i have to say this too ofcourse i do like the concept and am looking forward to see where it is going

i fully understand that it is pre-release, i just want to point out that it is advertised as something it is not Unfortunately, some people have too much knowledge about pre-releases, alpha testing and all that comes with it. These are the people who have the skills and experience who don't rely on forums to solve the problems they run into, often they bring a solution to the developer for some problem.. that is why it pains me to see that pre-release software is advertised as released software until after 2 sad hours of checking logs and code i realised it isn't even implemented yet nothing wrong with releasing alpha software, proofs of concept or software that keeps crashing every 5 seconds while it is in development, just don't advertise it as software that (according to the website) is READY

it said i would get a command prompt.. but it is nowhere to be seen there is only a dummy package with the plugin page which does nothing either and everything else looks nice but doesn't do anything.. the only thing i can do is start and stop the server and click around in the top menu and see a nice graph of diskstats so basicely none of the things you say on your website actually works

i am using Plex to watch my media on my devices, but on my iMac i have XBMC running only for the subtitles... the subtitles plugin is awesome, lets you choose from different sites to get them and you can instantly see if it is out of sync or not... in case it is out of sync, XBMC has this awesome little feature to show the subtitle a bit sooner or later.. once you figured that out then you can always use something like subler to change the subtitle permamently... another benefit of doing this instead of using plex for automatically downloading the wrong subtitle, is that can place the subtitle with the media file instead of some obscure directory that you can't find anyway

thank you knigget.. off topic: i tried to go into the simplefeatures thread but with a 170 pages it becomes ridicilous they should start a thread for each feature

yes that solved it while hacking away i got once that it couldn't find the linux image... didn't know it ment the syslinux file but the problem i have is that i can't run 'make_bootable' as i have an all Mac enviroment however just replacing that file with the one from the 4.7 download does work!

so i have been building a new setup and changed my mobo and cpu, the rest came out the working server that has been running 5.0-RC8 for quite some time... when it was time to have it run i noticed the new RC release and couldn't resist to my very surprise, it doesn't even boot (well, not entirely).. it keeps hanging at the first line you see at booting then i took out the USB and put 4.7 on it and everything works have to retry it again with another release tomorrow or check permissions or something

in my first attempt i tried to install simpleFeatures.core.webGUI-1.0.5-noarch-1 simpleFeatures.system.info-1.0.5-noarch-1 simpleFeatures.system.stats-1.0.5-noarch-1 see my post above for the result of that... (which worked) but trying it again.. but with disk health, activity monitor, log viewer.. it all worked as advertised.. weird