Haugi
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Haugi
-
-
Hi everyone,
Hope you can help me here with this. I can't get my windows 10 install running in a VM again.
What do I have:
I have a ssd with a Windows 10 install that I use for booting directly into win10.
What do I want:
I want to use this ssd and win10 to run it as a VM in unraid if I need it.
What is my problem:
I always run in to this blue screen with inaccessable boot drive. I tryed already all possibilities with the config. Etc. It is always the same. Blue screen or nothing at all.
Can you help me here? Maybe I missed something
Thx
-
On 5/26/2021 at 11:04 PM, mgutt said:
Der Log Eintrag ist leider nichtssagend. Öffne den Netzwerkmonitor vom Browser (vorzugsweise Chrome) und prüfe mal ob da Fehler zu sehen sind, wenn du das Dokument öffnest / speicherst.
Meintest du so? Für mich als Laie ist das alles nichtssagend ^^
-
On 5/27/2021 at 5:54 PM, mgutt said:
Ich kann mir das nur durch die Leistungsaufnahme erklären. Installiere dir mal "stress":
wget https://packages.slackonly.com/pub/packages/14.2-x86_64/system/stress/stress-1.0.4-x86_64-1_slonly.txz -P /tmp upgradepkg --install-new /tmp/stress-1.0.4-x86_64-1_slonly.txz stress --cpu 8 &
Beende das WebTerminal und schau im Dashboard. Ist die CPU Last immer noch hoch? Wenn ja, Server runterfahren. Der Prozess wird bis kurz vor Schluss laufen.
Falls du noch mal was korrigieren möchtest, kannst du den Befehl übrigens so killen:
pkill -x stress
Hi,
danke für die mögliche Lösung, wie kann ich das denn instalieren? In den Apps finde ich das nicht.
Gruß -
Servus,
Hab es gerade nochmal probiert. Ist noch immer so wie beschrieben.
Gruß
-
Hallo unraid Community,
Kann mir jemand helfen der seinen onlyoffice Server über nginx und nextcloud zum Laufen gebracht hat?
Ich verwende folgende Konfiguration:
- nginx Proxy Manager
- cloudflare als Domain Verwalter
- Maria DB
- Nextcloud
- onlyoffice Community server
Mein Problem:
Wenn ich ein Dokument editiere bekomme ich nach ein paar Minuten folgende Fehlermeldung im Log:
21-05-26T13:19:57.739] [WARN] nodeJS - error description: docId = 3438171599 errorId = Update Version error
Im ui heißt es dann dass die Verbindung wieder hergestellt wurde und ich eine neue Version erstellen muss und nicht mehr speichern kann.
Ich vermute dass es irgendwo bei den nginx oder cloudflare Einstellungen liegt. Komme aber da selbst nicht mehr weiter und hab im englischen Raum auch nix gefunden die genau bei dieser Konfiguration so ein Problem behandeln.
Ich kann gerne Screenshots von meinem settings machen etc.
Danke
Gruß
-
Also ich mach das so:
Schalte den pc normal an, unraid fährt hoch, nun fahre ich den pc über die unraid shutdown Funktion gleich runter, keine vm wurde aktiviert. = PC geht aus, Netzteil macht Klick und PC fährt wieder hoch, wie in einer Schleife.
Nun starte ich bevor ich auf den shutdown Knopf drücke noch eine VM (Windows) = unraid/PC fährt runter und bleibt aus.
Meine Vermutung ist es hat was mit den wol settings to tun. Hab aber schon alles probiert in den Einstellungen. Unraid/BIOS/Router.
Gruß
-
Hallo zusammen,
Habt ihr das Problem im Betreff zufällig auch? Und konntet es idealerweise auch lösen ^^
Ich hab das schon seit ca. 6 Monaten und hab im Internet nix gefunden.
Gruß
-
Hi,
i have some issues with the Onlyoffice Server Docker. I get this Error after opening a document and try to edit and safe it for a couple minutes:
==> /var/log/onlyoffice/documentserver/docservice/out.log <==
[2021-05-25T17:56:50.175] [WARN] nodeJS - error description: docId = 1817512848 errorId = Update Version errorI use:
Nextcloud Docker
NGINX Proxy manager
Can you help me here?
BR Christian
-
Hi,
great work! Thx a lot. Where do i finde the BTC adresse in my Nicehash Account^^
THX again
-
-
-
Hi Community,
i have a wired bug in the system. This started a wile ago with some update. But i cant trace it back. So maybe someone of you can help here.
Problem:
I want to shut down the system but it performs a restart and boot up again.
Workaround:
I need to start a Windows VM and then i can shutdown the system and it stays off.
Can someone help here? My system is like this:
Unraid: 6.8.3
Motherboard: Asus X470 Prime
THX -
On 4/28/2020 at 12:34 PM, danioj said:
I am not sure on your setup BUT I have pihole setup with the default blocklists as well as a great deal more. I have just tried to update a plugin and it worked fine.
If you have setup pihole with its own IP AND you don't have the advanced docker option checked which allows for the "Host to communicate with custom networks" then I am going to guess that your issue relates to your unRAID server not being able to use pihole as a DNS server and therefore resolve the address that is used for updates.
Assuming I am right, you should add DNS servers - say Googles (1.1.1.1 and 1.0.0.1) - to your network config, meaning independent to your pihole setup, unRAID can always resolve addresses it needs to resolve whether the container is started or not. To me that is a no brainer as there is nothing unRAID does you would wan to block. In fact, you should do this anyway otherwise when you go to restart unRAID (when the container is not started) then it is not going to be able to do its network call home thing that it does (assuming it still does that) meaning you might not even be able to start the server.
THX Danioj, this solved my issue!
- I Enabled Host Acess to custom Network in advanced Docker settings
- I disabled preserve user defined Network in advanced Docker settings
The multiple DNS servers is handled by my router. So it does this job already.
BR Haugi
-
Hi,
when PiHole runs. unraid is unable to get updates for the OS / Plugin`s and the App store. As soon as i stop pihole all works. Can someone tell me wich adresses i need to wihtelist?
Thx
-
Hi,
as long i run pihole as docker. Unraid dont find any update of the system and the plugin`s. When i switch pihole off it finds the update`s. Can you tell me which Adresse i need to Whitelist to solve the issues?
thx
-
Hi,
i use a vpn to my homenetwork and want to start the server from your app. This dosent work any more. I can use everything fine when i`m normaly connected to the local lan. I use the fritzbox vpn client.
Can you help here?
Thx
-
On 11/26/2019 at 6:57 PM, wombat said:
Hi All, it's time for yet another request for help with adding external storage. I saw this topic has come up several times before in this thread and others, but none of the prior solutions worked for me. Thanks in advance for any help you can provide!
So, I'm trying to add a share called 'pictures' as an external storage within the Nextcloud container.
- I checked that the workgroup is indeed WORKGROUP, as that is the same used by my windows PC. I'm able to connect/browse/edit the SMB share from my windows PC without any issue. Also tried it with the 'domain' field in Nextcloud simply being empty.
- Currently the share is set to public, but I've tried it with Secure/Private as well.
- I searched around in various Nextcloud/smb log files, but I couldn't find any log that gets generated from actually trying to create the external storage in Nextcloud? Other than the angry red circle. Is there anywhere I can look to see *why* the attempt to create the external storage failed?
I should add that I'm aware that you can mount the share within the Nextcloud container and add it as a Local external storage instead, but that's my last resort. I'd much prefer to get it working as an SMB external storage.
I appreciate any help anyone might be able to give!
Hi,
i also have the same problem. Can someone help here? There are several post about this problem but no answer to it.
I appreciate the awesome work that you are doing here. so i hope someone can help or make a how to video ^^
Thx
-
Hi community,
my gpu dont want to passthrough on a Win10 VM. I`m sorry to open up this topic but i checked the last week every related video or topic on that issue what i could finde. I tried all the diffrent combinations of settings and solutions.
I hope some one in this forum can help me. Otherwise i need to buy a secound gpu and try this as a last step.
This is my first unraid setup but i was looking in it since one year and checked all the videos from space invader and so on. Everything went fine until now. Only this VM is driveing me crazy^^
My setup:
URAID Version: 6.8.0-rc4
CPU: Ryzen 2700X
GPU: ASUS RTX 2070 Strix advanced
Mainboard: Asus X470 Prime Pro (VM and IMMOU Group enabled)
Cache: 2x NVMW SSD 970 Evo Pro 500gb
What i already tryed:
1. downgrading to a bios before Ryzen 3 update (currently runing). Upgrading to latest bios
2. Split up the IMMOU Group of the Card completly. It has the soundcard nd the USB C controler al in one group
3. Hex edited the GPU bios from thechpowerup
4. switched the settings in the VM manager from i440/Q35, Seabios/OVMF
5. put the gpu in the secound pci slot.
What i found out:
1. the win10 iso will only boot correctly for setup when i use Seabios. otherwhise its only a strange console (see picture)
2. Q35 is the only way how the VM is working in Seabios. Otherwise i get the erore. (See picture)
2. VirtIO Drivers CDRom Bus: need to be SATA, IDE dosent work.
Here you can finde my XML for the VM:
<?xml version='1.0' encoding='UTF-8'?>
<domain type='kvm'>
<name>Windows 10</name>
<uuid>a7cd3058-1c41-8cc3-7051-4425174469cd</uuid>
<metadata>
<vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/>
</metadata>
<memory unit='KiB'>2097152</memory>
<currentMemory unit='KiB'>2097152</currentMemory>
<memoryBacking>
<nosharepages/>
</memoryBacking>
<vcpu placement='static'>6</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='4'/>
<vcpupin vcpu='1' cpuset='5'/>
<vcpupin vcpu='2' cpuset='8'/>
<vcpupin vcpu='3' cpuset='9'/>
<vcpupin vcpu='4' cpuset='12'/>
<vcpupin vcpu='5' cpuset='13'/>
</cputune>
<os>
<type arch='x86_64' machine='pc-q35-4.1'>hvm</type>
</os>
<features>
<acpi/>
<apic/>
<hyperv>
<relaxed state='on'/>
<vapic state='on'/>
<spinlocks state='on' retries='8191'/>
<vendor_id state='on' value='none'/>
</hyperv>
</features>
<cpu mode='host-passthrough' check='none'>
<topology sockets='1' cores='6' threads='1'/>
</cpu>
<clock offset='localtime'>
<timer name='hypervclock' present='yes'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/local/sbin/qemu</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='writeback'/>
<source file='/mnt/user/domains/Windows 10/vdisk1.img'/>
<target dev='hdc' bus='virtio'/>
<boot order='1'/>
<address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/isos/Windows.iso'/>
<target dev='hda' bus='sata'/>
<readonly/>
<boot order='2'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/>
<target dev='hdb' bus='sata'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
<controller type='sata' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pcie-root'/>
<controller type='pci' index='1' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='1' port='0x8'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
</controller>
<controller type='pci' index='2' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='2' port='0x9'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='pci' index='3' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='3' port='0xa'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='pci' index='4' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='4' port='0xb'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
</controller>
<controller type='pci' index='5' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='5' port='0xc'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x4'/>
</controller>
<controller type='pci' index='6' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='6' port='0xd'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x5'/>
</controller>
<controller type='pci' index='7' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='7' port='0xe'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x6'/>
</controller>
<controller type='pci' index='8' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='8' port='0xf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x7'/>
</controller>
<controller type='pci' index='9' model='pcie-root-port'>
<model name='pcie-root-port'/>
<target chassis='9' port='0x10'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</controller>
<controller type='pci' index='10' model='pcie-to-pci-bridge'>
<model name='pcie-pci-bridge'/>
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</controller>
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
</controller>
<controller type='usb' index='0' model='ich9-ehci1'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:50:ca:51'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
</interface>
<serial type='pty'>
<target type='isa-serial' port='0'>
<model name='isa-serial'/>
</target>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<channel type='unix'>
<target type='virtio' name='org.qemu.guest_agent.0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<input type='tablet' bus='usb'>
<address type='usb' bus='0' port='1'/>
</input>
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'>
<listen type='address' address='0.0.0.0'/>
</graphics>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x0a' slot='0x01' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
</memballoon>
</devices>
</domain>
Passthrough an entire SSD directly to a windows VM?
in VM Engine (KVM)
Posted
Thx but this was my starting point ☺️ without spaceinvader one I wouldn't be that far. I tryed every combination on the settings so far