noacess
-
Posts
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by noacess
-
-
This may be a dumb question but, is there a way to live migrate a VM between two unraid servers? Assume identical bare metal hardware. I know this is doable with proxmox but I wasn't sure if there were some fancy cli commands that could be ran to do this in unraid.
Thanks for the help!
-
2 hours ago, bonienl said:
For all disk shares set Export=No,
except for cache set Export=Yes
I was referring to my hack of copying a single file via user shares to create directory structures and then copying the rest of the files via the cache share because of transfer speed being comparatively slow through user shares when writing to cache.
-
If you stop your array, go into settings, then click on SMB there is a section called "Samba extra configuration:" That's where you paste the config I shared. After you start the array you should now see an extra share when you browse to your server. You don't need to create it under the "Shares" area of unraid. I would turn off disk shares unless you need it for something specific.
-
1
-
-
27 minutes ago, SpeedyVV said:
Hey, any chance you can do this "custom smb config that targets /mnt/cache directly" thingy?
ThanksBelow is what works for me. I usually just write 1 file through the user share and then once the folder structure is created I do the rest of my writes through the cache share. Its clunky, but it works for now until I can think of a more elegant solution.
[cacheShare]
path=/mnt/cache
valid users = whoever
write list = whoever -
Hey everyone,
I recently rebuilt my unraid server and I'm seeing some strange cache write speed behavior. If I write to a user share that has use cache set to Yes via SMB I can copy at about 280 MB/s which is slow. If I enable disk shares and do the same copy direct to the cache drive share I get well over 1 GB/s which is what I'd expect. The only thing I've tried so far is enabling Direct IO but that didn't help.
The cache drive is a hardware raid of SAS3 SSDs. The PC I'm copying from has a PCIE 4.0 nvme disk in it. Diagnostics attached. Any help would be appreciated!
Thanks
-
I'm just curious what kind of performance everyone is getting. I recently got my 40Gb Mellanox Connectx-3 cards working with unraid but my SMB copy speeds to a ram drive are maxing out at about 1.5 - 1.7 GB/s which feels a bit slow. The only SMB options I've added are below. On the client side I'm copying from a pcie 4.0 NVME drive which has read speeds over 4GB/s so that shouldn't be the issue. Any thoughts/suggestions? Thanks!
server multi channel support = yes
aio read size = 1
aio write size = 1
strict locking = No -
4 minutes ago, johnnie.black said:
I think so, I get get close to max with a single thread, and a copy works like a single thread.
Jumbo frames might help with that, if not it's likely the NIC hardware/cables.
I'll do some science tonight with jumbo frames. I've also go another NIC I can try if that doesn't yield and results. Wish me luck! Thanks for the help.
-
2 minutes ago, johnnie.black said:
Do you get 10GbE speeds or close with a single thread? Multiple threads can give better results than single and one should be enough.
Single thread yields about half the speed. Maybe this is my problem (although I don't know how to fix it)? Two threads yields similar results to 10 threads like above.
Thanks!
C:\temp\iperf-3.1.3-win64>iperf3.exe -P 1 -c 192.168.1.15
Connecting to host 192.168.1.15, port 5201
[ 4] local 192.168.1.8 port 9056 connected to 192.168.1.15 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 639 MBytes 5.36 Gbits/sec
[ 4] 1.00-2.00 sec 640 MBytes 5.37 Gbits/sec
[ 4] 2.00-3.00 sec 662 MBytes 5.55 Gbits/sec
[ 4] 3.00-4.00 sec 655 MBytes 5.49 Gbits/sec
[ 4] 4.00-5.00 sec 640 MBytes 5.37 Gbits/sec
[ 4] 5.00-6.00 sec 636 MBytes 5.34 Gbits/sec
[ 4] 6.00-7.00 sec 778 MBytes 6.52 Gbits/sec
[ 4] 7.00-8.00 sec 632 MBytes 5.30 Gbits/sec
[ 4] 8.00-9.00 sec 643 MBytes 5.39 Gbits/sec
[ 4] 9.00-10.00 sec 682 MBytes 5.72 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 6.45 GBytes 5.54 Gbits/sec sender
[ 4] 0.00-10.00 sec 6.45 GBytes 5.54 Gbits/sec receiveriperf Done.
-
4 hours ago, johnnie.black said:
I only use jumbo frames and Direct IO (Settings -> Global Share Settings) and get practically line speed.
What kind of cache are you using? I have Direct IO enabled. iperf leads me to believe the network side shouldn't be an issue.
Thanks for the response!
C:\temp\iperf-3.1.3-win64>iperf3.exe -P 10 -c 192.168.1.15 Connecting to host 192.168.1.15, port 5201 [ 4] local 192.168.1.8 port 8667 connected to 192.168.1.15 port 5201 [ 6] local 192.168.1.8 port 8668 connected to 192.168.1.15 port 5201 [ 8] local 192.168.1.8 port 8669 connected to 192.168.1.15 port 5201 [ 10] local 192.168.1.8 port 8670 connected to 192.168.1.15 port 5201 [ 12] local 192.168.1.8 port 8671 connected to 192.168.1.15 port 5201 [ 14] local 192.168.1.8 port 8672 connected to 192.168.1.15 port 5201 [ 16] local 192.168.1.8 port 8673 connected to 192.168.1.15 port 5201 [ 18] local 192.168.1.8 port 8674 connected to 192.168.1.15 port 5201 [ 20] local 192.168.1.8 port 8675 connected to 192.168.1.15 port 5201 [ 22] local 192.168.1.8 port 8676 connected to 192.168.1.15 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 93.2 MBytes 782 Mbits/sec [ 6] 0.00-1.00 sec 92.8 MBytes 778 Mbits/sec [ 8] 0.00-1.00 sec 93.0 MBytes 780 Mbits/sec [ 10] 0.00-1.00 sec 93.5 MBytes 784 Mbits/sec [ 12] 0.00-1.00 sec 93.4 MBytes 783 Mbits/sec [ 14] 0.00-1.00 sec 94.2 MBytes 790 Mbits/sec [ 16] 0.00-1.00 sec 95.5 MBytes 801 Mbits/sec [ 18] 0.00-1.00 sec 93.1 MBytes 781 Mbits/sec [ 20] 0.00-1.00 sec 94.6 MBytes 793 Mbits/sec [ 22] 0.00-1.00 sec 93.1 MBytes 781 Mbits/sec [SUM] 0.00-1.00 sec 936 MBytes 7.85 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 6] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 8] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 10] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 12] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 14] 1.00-2.00 sec 113 MBytes 945 Mbits/sec [ 16] 1.00-2.00 sec 113 MBytes 946 Mbits/sec [ 18] 1.00-2.00 sec 113 MBytes 945 Mbits/sec [ 20] 1.00-2.00 sec 113 MBytes 945 Mbits/sec [ 22] 1.00-2.00 sec 112 MBytes 944 Mbits/sec [SUM] 1.00-2.00 sec 1.10 GBytes 9.45 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 6] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 8] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 10] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 12] 2.00-3.00 sec 112 MBytes 937 Mbits/sec [ 14] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 16] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 18] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 20] 2.00-3.00 sec 112 MBytes 936 Mbits/sec [ 22] 2.00-3.00 sec 111 MBytes 935 Mbits/sec [SUM] 2.00-3.00 sec 1.09 GBytes 9.36 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 3.00-4.00 sec 113 MBytes 945 Mbits/sec [ 6] 3.00-4.00 sec 113 MBytes 945 Mbits/sec [ 8] 3.00-4.00 sec 113 MBytes 947 Mbits/sec [ 10] 3.00-4.00 sec 113 MBytes 947 Mbits/sec [ 12] 3.00-4.00 sec 113 MBytes 947 Mbits/sec [ 14] 3.00-4.00 sec 113 MBytes 945 Mbits/sec [ 16] 3.00-4.00 sec 113 MBytes 947 Mbits/sec [ 18] 3.00-4.00 sec 113 MBytes 945 Mbits/sec [ 20] 3.00-4.00 sec 113 MBytes 944 Mbits/sec [ 22] 3.00-4.00 sec 113 MBytes 944 Mbits/sec [SUM] 3.00-4.00 sec 1.10 GBytes 9.46 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 4.00-5.00 sec 113 MBytes 946 Mbits/sec [ 6] 4.00-5.00 sec 113 MBytes 946 Mbits/sec [ 8] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 10] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 12] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 14] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 16] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 18] 4.00-5.00 sec 113 MBytes 945 Mbits/sec [ 20] 4.00-5.00 sec 113 MBytes 944 Mbits/sec [ 22] 4.00-5.00 sec 113 MBytes 944 Mbits/sec [SUM] 4.00-5.00 sec 1.10 GBytes 9.45 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 5.00-6.00 sec 113 MBytes 946 Mbits/sec [ 6] 5.00-6.00 sec 113 MBytes 946 Mbits/sec [ 8] 5.00-6.00 sec 113 MBytes 946 Mbits/sec [ 10] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [ 12] 5.00-6.00 sec 113 MBytes 946 Mbits/sec [ 14] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [ 16] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [ 18] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [ 20] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [ 22] 5.00-6.00 sec 113 MBytes 945 Mbits/sec [SUM] 5.00-6.00 sec 1.10 GBytes 9.45 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 6] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 8] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 10] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 12] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 14] 6.00-7.00 sec 113 MBytes 945 Mbits/sec [ 16] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 18] 6.00-7.00 sec 113 MBytes 946 Mbits/sec [ 20] 6.00-7.00 sec 113 MBytes 945 Mbits/sec [ 22] 6.00-7.00 sec 112 MBytes 944 Mbits/sec [SUM] 6.00-7.00 sec 1.10 GBytes 9.46 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 6] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 8] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 10] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 12] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 14] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 16] 7.00-8.00 sec 113 MBytes 946 Mbits/sec [ 18] 7.00-8.00 sec 113 MBytes 945 Mbits/sec [ 20] 7.00-8.00 sec 113 MBytes 945 Mbits/sec [ 22] 7.00-8.00 sec 113 MBytes 945 Mbits/sec [SUM] 7.00-8.00 sec 1.10 GBytes 9.46 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 6] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 8] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 10] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 12] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 14] 8.00-9.00 sec 113 MBytes 945 Mbits/sec [ 16] 8.00-9.00 sec 113 MBytes 946 Mbits/sec [ 18] 8.00-9.00 sec 113 MBytes 945 Mbits/sec [ 20] 8.00-9.00 sec 113 MBytes 945 Mbits/sec [ 22] 8.00-9.00 sec 113 MBytes 945 Mbits/sec [SUM] 8.00-9.00 sec 1.10 GBytes 9.45 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ 4] 9.00-10.00 sec 96.4 MBytes 808 Mbits/sec [ 6] 9.00-10.00 sec 97.4 MBytes 817 Mbits/sec [ 8] 9.00-10.00 sec 96.1 MBytes 806 Mbits/sec [ 10] 9.00-10.00 sec 96.5 MBytes 809 Mbits/sec [ 12] 9.00-10.00 sec 96.1 MBytes 806 Mbits/sec [ 14] 9.00-10.00 sec 97.1 MBytes 815 Mbits/sec [ 16] 9.00-10.00 sec 98.5 MBytes 826 Mbits/sec [ 18] 9.00-10.00 sec 96.2 MBytes 807 Mbits/sec [ 20] 9.00-10.00 sec 97.6 MBytes 819 Mbits/sec [ 22] 9.00-10.00 sec 96.2 MBytes 807 Mbits/sec [SUM] 9.00-10.00 sec 968 MBytes 8.12 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth [ 4] 0.00-10.00 sec 1.06 GBytes 915 Mbits/sec sender [ 4] 0.00-10.00 sec 1.06 GBytes 915 Mbits/sec receiver [ 6] 0.00-10.00 sec 1.07 GBytes 915 Mbits/sec sender [ 6] 0.00-10.00 sec 1.07 GBytes 915 Mbits/sec receiver [ 8] 0.00-10.00 sec 1.06 GBytes 914 Mbits/sec sender [ 8] 0.00-10.00 sec 1.06 GBytes 914 Mbits/sec receiver [ 10] 0.00-10.00 sec 1.07 GBytes 915 Mbits/sec sender [ 10] 0.00-10.00 sec 1.07 GBytes 915 Mbits/sec receiver [ 12] 0.00-10.00 sec 1.06 GBytes 915 Mbits/sec sender [ 12] 0.00-10.00 sec 1.06 GBytes 915 Mbits/sec receiver [ 14] 0.00-10.00 sec 1.07 GBytes 916 Mbits/sec sender [ 14] 0.00-10.00 sec 1.07 GBytes 916 Mbits/sec receiver [ 16] 0.00-10.00 sec 1.07 GBytes 918 Mbits/sec sender [ 16] 0.00-10.00 sec 1.07 GBytes 918 Mbits/sec receiver [ 18] 0.00-10.00 sec 1.06 GBytes 914 Mbits/sec sender [ 18] 0.00-10.00 sec 1.06 GBytes 914 Mbits/sec receiver [ 20] 0.00-10.00 sec 1.07 GBytes 916 Mbits/sec sender [ 20] 0.00-10.00 sec 1.07 GBytes 916 Mbits/sec receiver [ 22] 0.00-10.00 sec 1.06 GBytes 913 Mbits/sec sender [ 22] 0.00-10.00 sec 1.06 GBytes 913 Mbits/sec receiver [SUM] 0.00-10.00 sec 10.7 GBytes 9.15 Gbits/sec sender [SUM] 0.00-10.00 sec 10.7 GBytes 9.15 Gbits/sec receiver iperf Done. -
Hey guys,
What kind of speeds are folks getting on their cache drives when copying to them over a 10GB network via SMB (no jumbo frames)? I've got 2 Samsung PM953 nvme drives setup in brtfs raid 0 and can only get it to write at 400 - 500MB/s from my Windows desktop. I have a Windows 2019 server on the same 10GB network that I'm able copy to at 1GB/s to a pair of SATA3 SSDs in raid 0. Does anyone have any tuning advice? Diags attached. Thanks!
-
When will this be updated to the latest 0.9.14 release? Thanks for your work on this!
-
You're right. And that actually fixed it. I'm not sure I understand why though. Using both /mnt/cache/appdata/ and /mnt/cache/appdata/sonarr/ made it create the path: /mnt/cache/appdata/sonarr/
Thanks for the help!
-
I made that change and the run command is now:
/plugins/dynamix.docker.manager/scripts/docker create --name="sonarr" --net="bridge" -e TZ="America/New_York" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8989:8989/tcp -v "/dev/rtc":"/dev/rtc":ro -v "/mnt/user/TV/":"/tv":rw -v "/mnt/user/downloads/":"/downloads":rw -v "/mnt/cache/appdata/":"/config":rw linuxserver/sonarr
and the AppData Config Path is now: /mnt/cache/appdata/
I'm still getting the error:
[Info] Bootstrap: Starting Sonarr - /opt/NzbDrone/NzbDrone.exe - Version 2.0.0.4689
[Info] AppFolderInfo: Data directory is being overridden to [/config]
[Info] MigrationLogger: *** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 ***
[Fatal] ConsoleApp: EPIC FAIL!
[v2.0.0.4689] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Sonarr/Sonarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O error
disk I/O error
at System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in <61a20cde294d4a3eb43b9d9f6284613b>:0
at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x00068] in <61a20cde294d4a3eb43b9d9f6284613b>:0
--- End of inner exception stack trace ---
at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00121] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:116
at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationType migrationType) [0x00000] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:56
at NzbDrone.Core.Datastore.DbFactory.RegisterDatabase (NzbDrone.Common.Composition.IContainer container) [0x00000] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:36
at NzbDrone.Host.Bootstrap.Start (NzbDrone.Host.ApplicationModes applicationModes, NzbDrone.Common.EnvironmentInfo.StartupContext startupContext) [0x0003d] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Host\Bootstrap.cs:73
at NzbDrone.Host.Bootstrap.Start (NzbDrone.Common.EnvironmentInfo.StartupContext startupContext, NzbDrone.Host.IUserAlert userAlert, System.Action`1[T] startCallback) [0x00075] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Host\Bootstrap.cs:40
at NzbDrone.Console.ConsoleApp.Main (System.String[] args) [0x0000e] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Console\ConsoleApp.cs:20
Press enter to exit...Before I started the docker back up I deleted the previously created sonarr folder in appdata. After starting the docker here is what the permissions look like. Does that look correct?
root@Tower:/mnt/cache/appdata# ls -al
total 16
drwxrwxrwx 1 nobody users 52 May 5 13:42 ./
drwxrwxrwx 1 nobody users 58 May 4 17:29 ../
drwxr-xr-x 1 nobody users 134 May 5 13:42 sonarr/
Thanks for the help!
-
Here is the docker run command: /plugins/dynamix.docker.manager/scripts/docker create --name="sonarr" --net="bridge" -e TZ="America/New_York" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -p 8989:8989/tcp -v "/dev/rtc":"/dev/rtc":ro -v "/mnt/user/TV/":"/tv":rw -v "/mnt/user/downloads/":"/downloads":rw -v "/mnt/user/appdata/sonarr":"/config":rw linuxserver/sonarr
-
I just tried installing this docker fresh and I'm getting the error below. I've attached a screenshot of my config. Any idea? Thanks for the help!
[Info] Bootstrap: Starting Sonarr - /opt/NzbDrone/NzbDrone.exe - Version 2.0.0.4689
[Info] AppFolderInfo: Data directory is being overridden to [/config]
[Info] MigrationLogger: *** Migrating data source=/config/nzbdrone.db;cache size=-10485760;datetimekind=Utc;journal mode=Wal;pooling=True;version=3 ***
[Fatal] ConsoleApp: EPIC FAIL![v2.0.0.4689] NzbDrone.Core.Datastore.CorruptDatabaseException: Database file: /config/nzbdrone.db is corrupt, restore from backup if available. See: https://github.com/Sonarr/Sonarr/wiki/FAQ#i-am-getting-an-error-database-disk-image-is-malformed ---> System.Data.SQLite.SQLiteException: disk I/O error
disk I/O error
at System.Data.SQLite.SQLite3.Prepare (System.Data.SQLite.SQLiteConnection cnn, System.String strSql, System.Data.SQLite.SQLiteStatement previous, System.UInt32 timeoutMS, System.String& strRemain) [0x0033c] in <61a20cde294d4a3eb43b9d9f6284613b>:0
at System.Data.SQLite.SQLiteCommand.BuildNextCommand () [0x00068] in <61a20cde294d4a3eb43b9d9f6284613b>:0
--- End of inner exception stack trace ---
at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationContext migrationContext) [0x00121] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:116
at NzbDrone.Core.Datastore.DbFactory.Create (NzbDrone.Core.Datastore.Migration.Framework.MigrationType migrationType) [0x00000] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:56
at NzbDrone.Core.Datastore.DbFactory.RegisterDatabase (NzbDrone.Common.Composition.IContainer container) [0x00000] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Core\Datastore\DbFactory.cs:36
at NzbDrone.Host.Bootstrap.Start (NzbDrone.Host.ApplicationModes applicationModes, NzbDrone.Common.EnvironmentInfo.StartupContext startupContext) [0x0003d] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Host\Bootstrap.cs:73
at NzbDrone.Host.Bootstrap.Start (NzbDrone.Common.EnvironmentInfo.StartupContext startupContext, NzbDrone.Host.IUserAlert userAlert, System.Action`1[T] startCallback) [0x00075] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Host\Bootstrap.cs:40
at NzbDrone.Console.ConsoleApp.Main (System.String[] args) [0x0000e] in M:\BuildAgent\work\b69c1fe19bfc2c38\src\NzbDrone.Console\ConsoleApp.cs:20Press enter to exit...
-
This is a new installation. I have OPT_MYSQL set to Y. I did some digging around and found this in the catalina.out inside the container. Do you think this is the issue and any ideas on how to fix it?
18:25:04.014 [localhost-startStop-1] ERROR o.a.g.extension.ExtensionModule - Extension "guacamole-auth-jdbc-mysql-0.9.12-incubating.jar" could not be loaded: Extension is not a valid zip file: guacamole-auth-jdbc-mysql-0.9.12-incubating.jar
Thanks for your help!
-
I tried installing this docker today and for some reason I can't login with guacadmin/guacadmin Any ideas why this might be? If I create a user in the user-mapping.xml file I can get in with that.
Another issue I'm having is getting a RDP connection to work. SSH works fine, but RDP won't seem to connect to my windows servers (NLA is off).
Any help would be greatly appreciated!
-
I recently upgrade my cache drive and wanted to reuse the old one in the array so I decided to preclear it. Below are the results. Should I be worried about it?
== Disk /dev/sdf has been successfully precleared
== with a starting sector of 64
============================================================================
** Changed attributes in files: /tmp/smart_start_sdf /tmp/smart_finish_sdf
ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE
Spin_Retry_Count = 100 100 97 near_thresh 1
End-to-End_Error = 100 100 99 near_thresh 0
High_Fly_Writes = 1 1 0 near_thresh 229
Airflow_Temperature_Cel = 70 77 45 near_thresh 30
Temperature_Celsius = 30 23 0 ok 30
Hardware_ECC_Recovered = 54 38 0 ok 88475969
No SMART attributes are FAILING_NOW
0 sectors were pending re-allocation before the start of the preclear.
0 sectors were pending re-allocation after pre-read in cycle 1 of 1.
0 sectors were pending re-allocation after zero of disk in cycle 1 of 1.
0 sectors are pending re-allocation at the end of the preclear,
the number of sectors pending re-allocation did not change.
3 sectors had been re-allocated before the start of the preclear.
3 sectors are re-allocated at the end of the preclear,
the number of sectors re-allocated did not change.
Thanks!
Parity Disks Disabled after power outage
in General Support
Posted
I recently had a power outage where my DAS went down unexpectedly. I did a read check and it finished without any errors but my two parity drives are now disabled. How do I fix this? Do I need to unassign and reassign them to rebuild parity? Any advice would be greatly appreciated. I've attache d diagnostics.
Thanks!
tower-diagnostics-20221031-1031.zip