[Unable to upgrade/replace drive in array - drive disappears?]

>  I would carefully check all cabling to the drive.  If it is not that then the drive itself could be faulty.

Crap - the drive sites in a hot swap tray - and I rechecked the old 3tb drive - it works fine.

The drive is brand new. It has to be the drive.  The drive is the only thing that changed.

OK thanks guys I will RMA it.

 

[Unable to upgrade/replace drive in array - drive disappears?]

Attached are the logs after a fresh reboot and logs after I try to add the drive.

I also included a few screenshots of what happens.

 

Thanks Jorge

after trying to add -diagnostics-20221222-1354.zip fresh boot -diagnostics-20221222-1351.zip

[Unable to upgrade/replace drive in array - drive disappears?]

Hi all,

 

I have an HP microserver Gen8 that has been running fine for years.   Time for HDD upgrades!

I bought a few 14tb drives for the upgrade but am having issues.

First I upgraded my parity drive.  It went fine and took about 18 hours.

 

Now I am trying to remove a 3tb and am having trouble.

Steps taken

- ran parity check.

- turned off all my docker auto starts

- turned off my array auto start

- powered off server

- replaced 3tb drive with 14tb drive.

Powered on server.

 

Here's where the problems begin.

The slot where the 3TB used to be is empty as expected - I try to add the 14tb from the pull down menu, but when I do so it disappears and is now listed as an "Unassigned Drive".

 

It is unable to be mounted and says Array with a circle and slash (words greyed out)

 

Any ideas how I can get this into the array?

Both drives are supposed to be 14tb.  Is it possible that this one is a few bytes larger than the parity drive?  If so how can I find out?

 

Thanks in advance

Rob

[Unraid Forum 100K Giveaway]

He everyone

I like being able to add drives on at a time if I need to.

 

I would like to see better VM support