Hi i have buy a intel quad port

but i understand  how to attach this card or port to my VM, 
i see port in system device : https://prnt.sc/wjbxqx

in network settings i see all ports : https://prnt.sc/wjcrce
but nothing in other pci devices : https://prnt.sc/wjcs33

in VM manager i have test all 4 choices but nothing in vm (other pci devices ???)

 

i don't understand you have a idea ?

 

i forgot to say ...
i see in network bridge all bridges : https://prnt.sc/wjlluh

You will need to enable physical passtrough of the Device or NIcs.

There is a video:

 

 

 

...and here's the plugin available to help doing this:

 

ok it works better
but I have one last question ...
I have selected all the ports, but only the first 2 are (bound) : https://prnt.sc/wk72cr
And suddenly in the VM, I only see these 2 ports there? and not the 4? https://prnt.sc/wk741c
an idea ?

 

 

in network settings i see 2 ports on intel card : https://prnt.sc/wk767r

Ok i have add this command line reboot  and it's ok VM see my all 4 ports

append vfio-pci.ids=8086:1521 initrd=/bzroot

You  still should be able do this with individual ports instead of the complete Quad-Card.

The main problem is, I think, that you used that card for your standard ethernet in unRaid network settings.

So, first, switch over ethernet of unRaid to another NIC (like the onboard NIC) and also do not include the NICs from the Quard-Card into a bonding interface in unraid network settings. If you only have a single onboard NIC, use that and disable bonding altogether.

 

Once you have done that, you should be able to pass-trough the NIC ports individually.