Falloutman Posted February 9, 2021 Share Posted February 9, 2021 (edited) Below is the history from my monthly parity checks. Ever since I replaced my Parity Drive with a 14tb, this is a monthly issue whenever the scan runs. Where do I start? Date Duration Speed Status Errors Elapsed Time Increments Type 2021-02-03, 10:41:17 1 day, 12 hr, 13 min, 33 sec 107.4 MB/s OK 967841513 Unknown Unavailable 2020-12-28, 09:46:17 1 min, 28 sec Unavailable Canceled 0 Unknown Unavailable 2020-12-26, 02:10:08 1 day, 6 hr, 33 min, 15 sec 127.3 MB/s OK 967841513 Unknown Unavailable 2 day, 13 hr, 29 min, 28 sec 1 OK Unknown Unavailable 2020-12-06, 02:16:18 2 day, 13 hr, 29 min, 28 sec 63.2 MB/s OK 967841513 Unknown Unavailable 13 min, 34 sec 1 OK Unknown Unavailable 2020-12-04, 12:12:47 13 min, 34 sec 17.2 GB/s Canceled 8485997 Unknown Unavailable 2020-12-04, 12:02:37 25 sec Unavailable Canceled 383899 Unknown Unavailable 2020-12-03, 22:28:24 1 day, 22 hr, 19 min, 24 sec 84.0 MB/s OK 0 1 day, 22 hr, 19 min, 24 sec 1 Correcting 2020-12-02, 17:35:19 2 day, 8 hr, 23 min, 52 sec 69.0 MB/s OK 0 2 day, 8 hr, 23 min, 52 sec 1 Non-Correcting 2020-12-01, 10:11:24 20 hr, 22 min, 46 sec 54.5 MB/s OK 0 20 hr, 22 min, 46 sec 1 Correcting 2020-11-01, 09:12:41 20 hr, 25 min, 18 sec 54.4 MB/s OK 0 20 hr, 25 min, 18 sec 1 Non-Correcting 2020-10-01, 10:12:25 10 hr, 12 min, 24 sec 108.9 MB/s OK 0 10 hr, 12 min, 24 sec 1 Correcting 11 hr, 18 min, 39 sec 1 OK 2020-09-01, 11:18:40 11 hr, 18 min, 39 sec 98.3 MB/s OK 11 2020-08-14, 08:46:05 10 hr, 33 min, 28 sec 105.3 MB/s OK 11 2020-08-07, 21:51:01 10 hr, 59 min, 14 sec 101.1 MB/s OK 11 2020-08-04, 21:41:34 10 hr, 36 min, 58 sec 104.7 MB/s OK 11 2020-08-04, 00:40:40 11 hr, 46 min, 33 sec 94.4 MB/s OK 19 tower-diagnostics-20210209-0938.zip Edited February 9, 2021 by Falloutman Adding diagnostics Quote Link to comment
itimpi Posted February 9, 2021 Share Posted February 9, 2021 Not quite sure what question you are asking? If it is the very large value in the Errors column then this might be due to the part of the parity drive beyond the size of the previous one not being correctly zeroed by Unraid when the new one was added (there have been reports of this happening). These errors would keep being reported until you run a correcting check after which the count should return to zero for subsequent runs. If you use the History button on the Main tab that data will be better formatted The entries with the extra fields are ones where you have had the Parity Check Tuning plugin active and it has added to the entry with information it has gathered. Quote Link to comment
Falloutman Posted February 9, 2021 Author Share Posted February 9, 2021 2 minutes ago, itimpi said: Not quite sure what question you are asking? If it is the very large value in the Errors column then this might be due to the part of the parity drive beyond the size of the previous one not being correctly zeroed by Unraid when the new one was added (there have been reports of this happening). These errors would keep being reported until you run a correcting check after which the count should return to zero for subsequent runs. If you use the History button on the Main tab that data will be better formatted The entries with the extra fields are ones where you have had the Parity Check Tuning plugin active and it has added to the entry with information it has gathered. More or less just trying to figure out why these errors would occur. I have these errors corrected automatically while the Parity check is running but it keeps coming back. Took a quick screenshot to help with the formatting. Quote Link to comment
itimpi Posted February 9, 2021 Share Posted February 9, 2021 Are you sure it is a correcting check? Without the extra information added by the Parity Check Tuning plugin one cannot tell from the history. It might be possible to tell if you attach your systems diagnostics zip file (obtained via Tools->Diagnostics) to your NEXT post covering a period where this has happened. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.