Mover has been running for hours but I only see a couple GB actually moved.

 

iotop -o

Total DISK READ :       0.00 B/s | Total DISK WRITE :     177.10 K/s
Actual DISK READ:       0.00 B/s | Actual DISK WRITE:       0.00 B/s
  TID  PRIO  USER     DISK READ  DISK WRITE  SWAPIN     IO>    COMMAND                                                                            
30785 be/4 root        0.00 B/s    0.00 B/s  0.00 %  0.02 % [kworker/u8:5-events_power_efficient]
15906 be/4 root        0.00 B/s    3.85 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
17443 be/4 root        0.00 B/s   34.65 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
31806 be/4 root        0.00 B/s    7.70 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
22041 be/4 root        0.00 B/s   11.55 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
17696 be/4 root        0.00 B/s    7.70 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
17796 be/4 root        0.00 B/s   53.90 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
16781 be/4 root        0.00 B/s   11.55 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
16782 be/4 root        0.00 B/s    7.70 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
19995 be/4 root        0.00 B/s   15.40 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0
16836 be/4 root        0.00 B/s   23.10 K/s  0.00 %  0.00 % shfs /mnt/user -disks 31 -o noatime,allow_other -o remember=0

 

Docker and VM are off.  Where do I look to see what mover is trying to do to figure out why it does not seem to be making progress?

Hi,

I have the same issue, I also have no technical knowledge to that degree, I dont even know whats going on.
The NAS usses ressources for doing ... somehing... is this normal?

 

Hi,

The issue for me was caused by an app running on my osmc TV.
The app Watchdog was monitoring new movies and series and apparently tried to mount something.
As soon as i turned of NFS i noticed that the CPU load dropped dead, which as good.
Then i figured out its not a process on the NAS, but something else triggering it.