SMART errors

[SuperG]

I hope I am putting this into the correct section.

 

Hello, I have a 
Model Family:     Seagate BarraCuda 3.5 (SMR)
Device Model:     ST8000DM004-2CX188
Serial Number:    ZCT45WWS

 

that is throwing SMART errors in my Unraid server. (I have an array of 6 - 8TB drives installed) This is the second drive I have seen throw these SMART errors in the system in the past month. I have attached the SMART report. Can you please review and see if I need to warranty this drive as well? Do I have a setting setup incorrect and is too sensitive? I should note that last drive that was reporting SMART errors was on a different SATA port and has already been replaced. This is a DIFFERENT drive from that one.

 

I have kept a spare drive here in case of failure which I am pre-clearing if you see that in my diagnostic report.

 

Thanks,
SuperG

ST8000DM004-2CX188_ZCT45WWS-20210420-1802.txt gemini-diagnostics-20210420-1820.zip

[Vr2Io]

2 hours ago, SuperG said:

Can you please review and see if I need to warranty this drive as well?

Yes.

 

2 hours ago, SuperG said:

Do I have a setting setup incorrect and is too sensitive?

The error are report by disk.