July 15, 20214 yr Here's what happened. Disk 4 has read/write errors and gets disabled. Ran long SMART test on disk 4 with no errors. Rebuild disk 4 on same physical disk. Completes successfully. ~14 hours after rebuild completed successfully, disk 4 has read/write errors again and gets disabled. ~3 hours after disk 4's errors, disk 5 has read errors but is not disabled. At this point, I'm guessing I should replace the cables on disk 4 and disk 5, but am wondering if there's anything else I should try/do. Diags attached. filebox-diagnostics-20210715-1153.zip Edited July 15, 20214 yr by Fatal_Flaw
July 15, 20214 yr It definitely looks like a cabling issue. Try reseating again. (also check any power splitters etc -> they are the devil's bane)
July 15, 20214 yr Author Thanks, will do. I definitely have a rats nest of power splitters, so that's a good bet.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.