Belcraig Posted August 3, 2021 Share Posted August 3, 2021 (edited) HI all, I've got a VM working well passing through a Nvidia k5000 card, works good enough that it has replaced my main PC. I've been trying to get a second VM working, I've set it all up and have it working fine with VNC. The VM is to run on our tv, for plex and photos and eventually zoom etc... I got a GT710 card as it only takes up one slot space on my motherboard. I've followed the same instructions from Spaceinvader for passing through the GPU, (editing the vbios from tech powerup, adding a line in XML for multifunction and placing the graphics and sound on the same slot) However, when i boot the VM i am clearly having some graphics issues, the display has lots of Horizontal lines over it, that makes it unusable. I've tried the MSI GT710 V-bios <-- my card and i've also tried a zotec GT710 card Vbios, both have the same issue. Motherboard is s2600CWR, and according to the manual I've plugged it into a PCIe x16 (CPU2) - i've even assigned cores from CPU 2 incase this improved it. I've updated the drivers on the VM using the geforce experiance program. I've plugged the card: into a TV via HDMI into a monitor using DVI, both have the same result. I'm now out of ideas, can anyone offer suggestions? thanks Edited August 3, 2021 by Belcraig Quote Link to comment
Belcraig Posted August 3, 2021 Author Share Posted August 3, 2021 Just noticed the card i have is a GT 710 (1GD3H LP) but the only ones listed on Techpower are all 2 gb RAM. the 1GD3H LP on tech power up is liseted as a 720.. using this V-bios gives a black screen. Quote Link to comment
Belcraig Posted August 3, 2021 Author Share Posted August 3, 2021 While looking around that lovely man @SpaceInvaderOne made some scripts and a video on how to capture your own VBIOS. for those who arrive here look for the following video. How to Easily Dump the vBios from any GPU for Passthrough - YouTube Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.