November 30, 20214 yr Recently the server has been wanting to reboot itself. It started after I tried to install a second video card into the 2nd PCI-E X16 slot but it's IOMMOU grouping forced me to turn on the PCIE ACS override. Turning that on caued my parity drive to just disapere from the system and made the system lock up. So, took that out and turned ACS off. Stopped the array, got the parity drive back in, and started the rebuild and it wants to reboot iself when the rebuild started. I have a HiveOS VM that runs one Radeon 5700 in the top PCI-E slot that I've been running. When the server reboots it turns VM functinonality off. System is a MSI B550 Tomahawk with a Ryzen 7 5800X, 32gb (4x8gb) DDR4 3600, Radeon 5700 reference, 2x 8tb WD Red, 1x8tb Toshiba 8tb, 500gb SK Hynix SATA SSD, and a 1tb Mushkin Pilot-E. It's probably not the best board for the job, but it was on sale, available, and my ASUS B550 board died and was out of warranty. Thanks guys Edited November 30, 20214 yr by trurl delete lots of attached files that should have been a single zip
November 30, 20214 yr Community Expert I have deleted all those attachments, nobody is going to bother to download all those separate files. The Diagnostics is a single zip file. If it appears to you that it downloaded a lot of files and folders (not possible), it is because your browser has automatically opened that single zip file. Find that single diagnostics zip file wherever your browser usually saves downloads, and attach that single diagnostics zip file to your NEXT post in this thread.
November 30, 20214 yr Community Expert 51 minutes ago, Moshenokoji said: Ryzen 7 5800X, 32gb (4x8gb) DDR4 3600
November 30, 20214 yr Author 35 minutes ago, trurl said: Excellent, thank you, I did not know this. I set the RAM to 2933, changed the power supply idle control to typical, disabled C states, and went ahead and changed PBO to disabled as it was on auto. Going to run my parity check, that's where the system would crash and reboot. Would any of those settings for Ryzen affect the pairty drive and how it was dropping out with PCIE ACS override on? I appreciate your help.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.