My Seagate external HDD has a raw value of 4 on Command Timeout. Should I be worry?

 

Here is my CDI result

Current Worst Threshold Raw Value

100 99 0 000000000004

 

Edited February 1, 20224 yr by Danvic

Usually not a problem. 

Thanks JorgeB. But Backblaze says Command Timeout is 1 of the 5 critical attributes of SMART. And it is supposed to be zero on raw value.

It's quite common to be non zero with some Seagates, and like mentioned that attribute by itself it's generally not an issue.

Thanks again. How about Read Error Rate and Seek Error Rate? CDI reports random numbers and letters. Should I be worry on that instead?

https://forums.unraid.net/topic/86337-are-my-smart-reports-bad/?do=findComment&comment=800888