Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New old hardware issues.

Featured Replies

I'm running UnRAID 6.9.2

My old MB died.  I bought a used MB and CPU.  I was able to switch all of my hardware to the new machine and things looked like it was going to work fine.  For a time, I was only able to connect via local host on the physical machine.  Note:  I am running UnRAID on bare metal and not as a VM or docker or anything.  Straight from the USB drive.

 

I had issues with my static IP which took me a while to find and correct.  I have removed the static reservation from my network.

 

Now when I boot up, I get the Firefox browser telling me that it cannot connect to the localhost.  Google seaching has not helped.

 

I have tired different USB ports and all have the behavior.

I tried different network ports on my switch.

I was able to add a different NIC and that did not help.

 

I've modified the network.cfg many times but am currently running with this:

# Generated settings:
IFNAME[0]="br0"
BONDNAME[0]="bond0"
BONDING_MIIMON[0]="100"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BONDING_MODE[0]="1"
BONDNICS[0]="eth0 eth1"
BRNICS[0]="bond0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="no"
IPADDR[0]="192.168.1.9"
NETMASK[0]="255.255.255.0"
GATEWAY[0]="192.168.1.1"
DNS_SERVER1="192.168.1.1"
USE_DHCP6[0]="no"
DHCP6_KEEPRESOLV="no"
SYSNICS="1"

 

I've tried turning DHCP on then off on various tries.

I have turned off IPv6.

 

I've not messed with any of the other config files.

 

I am able to get into the UEFI and make any changes I want and I get good picture during boot and even in the GUI.  The hardware seems to work fine.

Using a Gigabyte GA-X58A-UD3R (rev. 1.0) with newest firmware and a Xeon W3690 and 24 GB DDR3 RAM.

Solved by trurl

  • Community Expert
  • Solution

Delete or rename network.cfg so it will use defaults then go from there.

 

Consider reserving IP by MAC address in router instead of setting static IP that way you can manage IPs for everything in the one place that matters.

  • Author

That worked.  Thank you very much.  Now on to the next issue.  One of my HDDs did not survive.  It died when I lost the MB aparently.  It was half expected.  I'll do my Google-Fu and if I can't get it, I know where to ask.  Thank you again.

 

Oh.  I will reserve the IP via DHCP reservation going forward. 

  • Community Expert
1 hour ago, don256us said:

One of my HDDs did not survive

What are the symptoms? A disabled disk is often just a bad connection. Attach diagnostics to your NEXT post for further advice.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.