So I have a standalone server on Hetzner.   Setup was easy enough like at home, but where I ran into issues was their firewall.  Everything I tried Nginx proxy manager would not work. 

 

Has anybody used their firewall before?

How did you get unraid on a hetzner server ?

On 8/6/2022 at 11:07 AM, Virtual said:

How did you get unraid on a hetzner server ?

You order your server at Hetzner and add a 16gb USB drive. If you already have a server there, you can create a ticket to get one.

- If you order a server with USB stick, create a support ticket to have a KVM hooked up since you need to go into bios to set the USB drive as default boot disk (Leave pxe boot as first option!)

- If you already have one and order the USB via ticket, also ask for a KVM hookup to set the 2nd boot (1st is pxe! Leave it) to USB

 

Once you have confirmation it's in, you go into the rescue mode. Once in rescue mode, you format the USB drive to FAT32, and label it UNRAID.

Mount it to a directory, for example /tmp/UNRAID_USB_DRIVE. Download Unraid installer in that folder, unzip it (remove the zip) and run the make_bootable_linux file.

Reboot, point a browser towards your IP adress and you should be able to set it up via GUI.

I'm in the process of finishing my setup just now.

 

  

On 4/1/2022 at 8:28 PM, NitroNine said:

So I have a standalone server on Hetzner.   Setup was easy enough like at home, but where I ran into issues was their firewall.  Everything I tried Nginx proxy manager would not work. 

 

Has anybody used their firewall before?

 

Totally forgot to reply to this. Firewall is completely open by default. Did you change anything?

Edited September 19, 20223 yr by Tuumke