All,

 

Received errors on Disk 3 after a parity check this month. I've attached diagnostics. Could someone take a look? I think I should check filesystem on Disk 3 but wanted to wait.

 

Thanks

tower-diagnostics-20220404-1129.zip

Log is full of connection errors from an unassigned disk, also filesystem issues with disk1, check filesystem on disk1, disconnect or replace cables on the unassigned disk and post new diags after array start.

On 4/4/2022 at 12:43 PM, JorgeB said:

Log is full of connection errors from an unassigned disk, also filesystem issues with disk1, check filesystem on disk1, disconnect or replace cables on the unassigned disk and post new diags after array start.

 

Thanks, I did the above. Attached are new diags. 

tower-diagnostics-20220410-0829.zip

You can now re-enable disk3:

https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself

 

Might be a good idea to replace/swap cables just to rule that out if it happens again.

On 4/11/2022 at 4:18 AM, JorgeB said:

You can now re-enable disk3:

https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself

 

Might be a good idea to replace/swap cables just to rule that out if it happens again.

 

Thank you.

On 4/11/2022 at 4:18 AM, JorgeB said:

You can now re-enable disk3:

https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself

 

Might be a good idea to replace/swap cables just to rule that out if it happens again.

I installed a couple drives. One of them had an error on the first parity check. I think there must be a cable issue. I didn't want to start a new topic becasue this seems like the same problem and I should just replace cables. I attached my diagnostics. Could you take a look when you have a chance? 

tower-diagnostics-20220602-2024.zip

Edited June 3, 20224 yr by Officero

Yes, looks more like a power/connection problem, suggest checking/replacing cables and rebuilding on top.