My first Nas with Unraid/Qnap 251+

[malex]

Hello everyone, I finally started my Nas with an old QNAP 251+ and I'm surprised how good it works I only have one problem at the moment because if I turn off the NAS it restarts after a few seconds? And a setting of Unraid or from the Qnap Bios? Thank you

 

 

Inviato dal mio iPhone utilizzando Tapatalk

[Vr2Io]

Update BIOS will fix the problem

https://forum.qnap.com/viewtopic.php?t=133898&start=15#p707545

[malex]

Hi, thank you for the reply, I'll do it immediately but is it possible to do it at Unraid?

[Vr2Io]

5 hours ago, malex said:

possible to do it at Unraid?

Yes

[malex]

7 hours ago, Vr2Io said:

Yes

 

Ok by chance I have to execute these commands from the terminal?

cd / share / Public /
wget http://download.qnap.com/Storage/tsd/bios/QW37AR36.zip
unzip QW37AR33.zip
chmod + x flashrom
./flashrom -p internal -w QW37AR33.BIN
reboot

 

[Vr2Io]

Stop array first, from terminal

 

cd /tmp
wget http://download.qnap.com/Storage/tsd/bios/QW37AR36.zip
unzip QW37AR36.zip
cd /tmp/QW37AR36
chmod +x flashrom
./flashrom -p internal -w QW37AR36.BIN
reboot

 

Edited May 21, 2022 by Vr2Io

[malex]

Stop array first, from terminal

 

cd /tmpwget http://download.qnap.com/Storage/tsd/bios/QW37AR36.zipunzip QW37AR36.zipcd /tmp/QW37AR36chmod +x flashrom./flashrom -p internal -w QW37AR36.BINreboot

 

Thank you very much for your support as soon as I finish re-installing the 6.10 I'll try it right away

[malex]

@Vr2Lo

 

Thanks again just tried it and it works correctly bios updated and when I give the command to turn off it turns off regularly