I get a max of 11mb/s when copying stuff to the array. from what i understand the norm is 20-30mb/s.

is there any easy way to tell which drive is causing this issue? [assuming a single drive is causing this issue]

while preclearing each drive i got the max of each drive. [around the 100mb/s]

 

thanks

I get a max of 11mb/s when copying stuff to the array. from what i understand the norm is 20-30mb/s.

is there any easy way to tell which drive is causing this issue? [assuming a single drive is causing this issue]

while preclearing each drive i got the max of each drive. [around the 100mb/s]

 

thanks

 

We need hardware breakdown, syslog, and the output of

ethtool eth0

 

It sounds like you could be on a none GB network and 11mb/s would be about right.

Or, the machine you are copying from only has a 100Mbit lan connection.

Ohshi-- I feel like such an idiot. forgot i replaced a broken switch with a non gb one.

let this be a lesson dont post at 3 in the morning : P

 

thanks anyway.