June 19, 20224 yr 白裙整明白了，然后就放在那里做个照片备份的小东西了 为了折腾，最近趁618组了一台新的机器跑unraid，配置为i5-12600t+铭瑄b660m终结者主板，电源是海韵的focus750，散热是塔式猫扇，内存是金士顿16g x4，显卡是蓝宝石6500xt，供电散热内存应该是没什么问题的，现在分析以下问题估计是cpu和主板带来的 之前用8100的时候这里显示的是显卡型号，为何unraid6.10.3不显示UHD770，是因为现在还没有完整的驱动吗？ 另外一个问题就是在开机之后几分钟之内日志会被以下信息占满，日志也显示百分百，研究了很多天没结果，麻烦问下各位这是什么原因造成的，不太看的懂这是哪个pcie设备 PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) Jun 8 23:11:21 Tower kernel: pcieport 0000:00:1d.0: device [8086:7ab6] error status/mask=00000080/00002000 PCI 设备和 IOMMU 组信息如下
June 19, 20224 yr 是升级还是重新做启动U盘系统？ 1、升级前要把旧主机设置清理，包括直通设置和docker，vms的相关硬件勾选。可以考虑重新制作系统U盘。 2、把硬件重新插拔一下，先以最少硬件运行，如内存只插一根，把amd这款显卡去掉测试。然后逐渐增加硬件。
June 20, 20224 yr Author 14 hours ago, lyqalex said: 是升级还是重新做启动U盘系统？ 1、升级前要把旧主机设置清理，包括直通设置和docker，vms的相关硬件勾选。可以考虑重新制作系统U盘。 2、把硬件重新插拔一下，先以最少硬件运行，如内存只插一根，把amd这款显卡去掉测试。然后逐渐增加硬件。 都试过，6.10.2没毛病，然后6.10.3rc1也没，就是升级了6.10.3之后出现的这问题
June 20, 20224 yr 你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題. lspci -Pvt -[0000:00]-+-00.0 Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] +-01.0-[01]----00.0 Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection +-02.0 Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] +-14.0 Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller +-14.2 Intel Corporation 200 Series PCH Thermal Subsystem +-16.0 Intel Corporation 200 Series PCH CSME HECI #1 +-17.0 Intel Corporation 200 Series PCH SATA controller [AHCI mode] +-1d.0-[02]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD +-1f.0 Intel Corporation Device a2cc +-1f.2 Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller +-1f.3 Intel Corporation 200 Series PCH HD Audio +-1f.4 Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller \-1f.6 Intel Corporation Ethernet Connection (2) I219-V Edited June 20, 20224 yr by Vr2Io
June 20, 20224 yr Author 6 hours ago, Vr2Io said: 你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題. lspci -Pvt -[0000:00]-+-00.0 Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] +-01.0-[01]----00.0 Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection +-02.0 Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] +-14.0 Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller +-14.2 Intel Corporation 200 Series PCH Thermal Subsystem +-16.0 Intel Corporation 200 Series PCH CSME HECI #1 +-17.0 Intel Corporation 200 Series PCH SATA controller [AHCI mode] +-1d.0-[02]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD +-1f.0 Intel Corporation Device a2cc +-1f.2 Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller +-1f.3 Intel Corporation 200 Series PCH HD Audio +-1f.4 Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller \-1f.6 Intel Corporation Ethernet Connection (2) I219-V 运行完命令出来是这个样子，看不太明白 sn750做了缓存盘正常使用中，貌似也没得问题
June 20, 20224 yr Author 6 hours ago, Vr2Io said: 你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題. lspci -Pvt -[0000:00]-+-00.0 Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S] +-01.0-[01]----00.0 Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection +-02.0 Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630] +-14.0 Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller +-14.2 Intel Corporation 200 Series PCH Thermal Subsystem +-16.0 Intel Corporation 200 Series PCH CSME HECI #1 +-17.0 Intel Corporation 200 Series PCH SATA controller [AHCI mode] +-1d.0-[02]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD +-1f.0 Intel Corporation Device a2cc +-1f.2 Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller +-1f.3 Intel Corporation 200 Series PCH HD Audio +-1f.4 Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller \-1f.6 Intel Corporation Ethernet Connection (2) I219-V 仔细看了一下1d口是不是pci转sata口转接板冲突了？如果是这种情况，有什么处理方法没得，还是说就只能换nvme转sta的转接器了？
June 20, 20224 yr 1d.0 原來接上了 9215 Marvell SATA 控制器, 這控制器沒有接上 SATA 硬碟, 你可在 bios 裏關閉它就可避免產生報錯. Edited June 20, 20224 yr by Vr2Io
June 20, 20224 yr Author 40 minutes ago, Vr2Io said: 1d.0 原來接上了 9215 Marvel SATA 控制器, 這控制器沒有接上 SATA 硬碟, 你可在 bios 裏關閉它就可避免產生報錯. 我刚刚尝试了一下在PCI 设备和 IOMMU 组里面选择在引导时对VIFO选择了绑定，重启之后问题得到解决。非常感谢。
June 20, 20224 yr Solution 2 hours ago, xnxy2012 said: 我刚刚尝试了一下在PCI 设备和 IOMMU 组里面选择在引导时对VIFO选择了绑定，重启之后问题得到解决。非常感谢。 👍
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.