Jump to content

Unraid server going unresponsive


Go to solution Solved by HappyBobJr,

Recommended Posts

Hello any/all.

 

For the longest time I've had this problem where my server would become completely unresponsive. For some unknown reason.  I did what the guide said and disabled C state and made sure no overclocking was done to the RAM, but the issue persists.

 

This freezing would only happen about once a couple times a month (lots of variation) so my "solution" was to connect a smart plug to it and it it it couldn't connect to the server, it would turn off and on rebooting the server.   Bad solution, but the only thing that worked.

 

Now the frequency has increased so much its hitting up to 4 times a day which is more than i can take, hence me begging for help here.

 

I've attached the diagnostics and 4 most recent crash logs.  

Dump 1 and Dump 4 look very similar.

Dump2.txt Dump3.txt Dump4.txt shadowraid-diagnostics-20221002-2201.zip Dump1.txt

Link to comment
7 hours ago, JorgeB said:

Look more like a hardware issue, you are also having flash drive problems.

Can you detail this out more?

 

Dump 1 and 4 having identical dereference addresses makes me think that the hardware isn't failing due to "dying" but an invalid configuration maybe.  What kind of hardware issue are you thinking, how can I isolate and fix this?

 

What kind of flash drive problems?  What part of the diagnostics/dump makes you think so?  (I didn't see anything there, but I'm also clueless)

 

 

Thank you for your time 

Link to comment
4 minutes ago, HappyBobJr said:

What kind of hardware issue are you thinking, how can I isolate and fix this?

Difficult to say, you can first try a different Unraid version, like v6.10.3, if you see the same issues with the very different kernel it's likely hardware.

 

 

5 minutes ago, HappyBobJr said:

What kind of flash drive problems? 

Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)
Oct  2 17:51:37 ShadowRaid kernel: device offline error, dev sda, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)
Oct  2 17:51:37 ShadowRaid kernel: device offline error, dev sda, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)

 

Link to comment
On 10/3/2022 at 1:02 PM, JorgeB said:

Difficult to say, you can first try a different Unraid version, like v6.10.3, if you see the same issues with the very different kernel it's likely hardware.

 

 

Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)
Oct  2 17:51:37 ShadowRaid kernel: device offline error, dev sda, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)
Oct  2 17:51:37 ShadowRaid kernel: device offline error, dev sda, sector 2080 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Oct  2 17:51:37 ShadowRaid kernel: FAT-fs (sda1): FAT read failed (blocknr 32)

 

 

Silly as it sounds, I turned on XMP to overclock RAM and turned Disk SpinDown to Never.

Haven't had a lock-up yet.  Fingers crossed, but this is the longest in a good while I've had no freeze.

 

Edit: Still alive!  Hope I dont' Jinx it.

Edited by HappyBobJr
Link to comment

Ok, it crashed again.  BUT overclocking the RAM made it last longer (for whatever reason).  The variablility of the crash dumps (especially including the address ones) should also have been a tip off.

 

Swapped the 4x16GB ram sticks to my wife's computer and did MEMTest and one of them is rapidly giving error messages.  Woohoo

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...