munit85 Posted October 22, 2022 Share Posted October 22, 2022 (edited) Hello everyone, Unraid 6.11.0 rolled back from 6.11.1 no change I'm having trouble in the following ways. main page takes up to a minute for the drive information to populate dashboard page also has this loading lag, as well as a lag in loading the processor usage information When i click to see the log of a docker (any docker) the page pops up, blank, waits maybe 20 seconds and closes. It will work after several tries When I update a docker, the update panel shows up, but no progress is shown. if i esc out after a minute or so it will have updated the docker, just not given me the information attempting to stop the array will either take a very long time or just hang and never stop entirely. This has happened twice. It seems that unassigned devices has the hardest time loading. It shows the loading wave the longest without actually finding anything. These problems happened when i tried to stop the array and it hung on unmounting the drives. since then it has acted oddly. Please advise, thank you plex-pc-diagnostics-20221022-1349.zip Edited October 22, 2022 by munit85 Quote Link to comment
chris smashe Posted October 22, 2022 Share Posted October 22, 2022 You could have an iowait issue like i had. 1 Quote Link to comment
munit85 Posted October 22, 2022 Author Share Posted October 22, 2022 (edited) Sure seems like iowait is the culprit based on these right? I'll try updating my bios tonight. I assume some iowait is normal, but not 30% plus? //edit - I take that back. that was while 2 vm's were running and for whatever reason the disk images were on the array, those 2 drives that were being used plus the 2 cache drives. Let me try this again with the domains in my cache pool Edited October 22, 2022 by munit85 Quote Link to comment
chris smashe Posted October 22, 2022 Share Posted October 22, 2022 I still have some 30% io wait but its no longer hanging my machine. I hope it helps you figure it out. 1 Quote Link to comment
munit85 Posted October 25, 2022 Author Share Posted October 25, 2022 I pulled any errors or warnings from my system logs. the mdns issue does seem interesting, not sure what to do about it though. Oct 22 17:37:10 Plex-PC kernel: ACPI: Early table checksum verification disabled Oct 22 17:37:10 Plex-PC kernel: pci 0000:01:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit] Oct 22 17:37:10 Plex-PC kernel: pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit] Oct 22 17:37:10 Plex-PC kernel: floppy0: no floppy controllers found Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT0._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT0._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT5._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT5._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT4._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT4._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT2._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT2._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT4._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT4._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.PRT5._GTF.DSSP], AE_NOT_FOUND (20220331/psargs-330) Oct 22 17:37:10 Plex-PC kernel: ACPI Error: Aborting method \_SB.PCI0.SAT0.PRT5._GTF due to previous error (AE_NOT_FOUND) (20220331/psparse-529) Oct 22 17:37:10 Plex-PC kernel: i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP Oct 22 17:37:14 Plex-PC mcelog: failed to prefill DIMM database from DMI data Oct 22 17:50:09 Plex-PC root: Fix Common Problems: Other Warning: Background notifications not enabled ** Ignored Oct 23 04:30:07 Plex-PC root: Fix Common Problems: Other Warning: Background notifications not enabled ** Ignored Oct 23 06:56:46 Plex-PC avahi-daemon[820]: *** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. *** Oct 23 07:15:50 Plex-PC nginx: 2022/10/23 07:15:50 [error] 5348#5348: *501968 connect() to unix:/var/tmp/compose_manager_action.sock failed (111: Connection refused) while connecting to upstream, client: 192.168.1.134, server: , request: "GET /logterminal/compose_manager_action/token HTTP/2.0", upstream: "http://unix:/var/tmp/compose_manager_action.sock:/token", host: "plex-pc:11443", referrer: "https://plex-pc:11443/logterminal/compose_manager_action/" Quote Link to comment
munit85 Posted October 25, 2022 Author Share Posted October 25, 2022 I tried visiting unraid with edge, vs my normal firefox and it seems to load fine. Seems its just a problem on my end. Quote Link to comment
munit85 Posted November 8, 2022 Author Share Posted November 8, 2022 to update. not solved, but I seem to be having mDNS errors. if I connect via IP address it loads fine. If I try to load via my server name plex-pc it takes a few tries and has all the sluggish behavior. I have lots of mdns entries in my log as well as dockers not being able to download their icons. So basically its something wrong with my network. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.