October 31, 20223 yr I recently upgraded my server to a ROG STRIX X299-E Gaming and i9-7900X. The NIC I use is an Intel 82599ES 10Gig. I also upgraded the cache disks from a 500GiB setup to a 1 TiB setup. Still SATA based SSD's though. Samsung 870s to be specific. On my previous setup I was able to copy data from my workstation that also uses 10g network at 800-900 MBps without issue. Now after my server hardware changes I am only able to achieve 100 MBps throughput. I am having a hard time identifying what could be causing this.
October 31, 20223 yr Community Expert Solution Start by checking the LAN link speed and/or running iperf.
October 31, 20223 yr Author 1 minute ago, JorgeB said: Start by checking the LAN link speed and/or running iperf. Ahh good catch. The link is only running at 1 GB. Now I need to figure out how to fix that..
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.