Hello! Thank you for taking the time to read!

 

I could use some help trying to figure out the source of the below hardware error. It seems to indicate PCIe but I was trying to figure out the specific device(s). Any ideas of where I should start?

 

Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 514
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]: It has been corrected by h/w and requires no further action
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]: event severity: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:  Error 0, type: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   section_type: PCIe error
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   port_type: 0, PCIe end point
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   version: 0.2
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   command: 0x0406, status: 0x0010
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   device_id: 0000:04:00.0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   slot: 0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   secondary_bus: 0x00
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   vendor_id: 0x144d, device_id: 0xa80a
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   class_code: 010802
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   bridge: secondary_status: 0x0000, control: 0x0000
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:  Error 1, type: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   section_type: PCIe error
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   port_type: 0, PCIe end point
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   version: 0.2
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   command: 0x0406, status: 0x0010
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   device_id: 0000:82:00.0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   slot: 0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   secondary_bus: 0x00
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   vendor_id: 0x144d, device_id: 0xa80a
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   class_code: 010802
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   bridge: secondary_status: 0x0000, control: 0x0000
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:  Error 2, type: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   section_type: PCIe error
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   port_type: 0, PCIe end point
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   version: 0.2
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   command: 0x0406, status: 0x0010
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   device_id: 0000:82:00.0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   slot: 0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   secondary_bus: 0x00
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   vendor_id: 0x144d, device_id: 0xa80a
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   class_code: 010802
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   bridge: secondary_status: 0x0000, control: 0x0000
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:  Error 3, type: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   section_type: PCIe error
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   port_type: 0, PCIe end point
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   version: 0.2
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   command: 0x0406, status: 0x0010
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   device_id: 0000:82:00.0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   slot: 0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   secondary_bus: 0x00
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   vendor_id: 0x144d, device_id: 0xa80a
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   class_code: 010802
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   bridge: secondary_status: 0x0000, control: 0x0000
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:  Error 4, type: corrected
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   section_type: PCIe error
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   port_type: 0, PCIe end point
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   version: 0.2
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   command: 0x0406, status: 0x0010
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   device_id: 0000:82:00.0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   slot: 0
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   secondary_bus: 0x00
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   vendor_id: 0x144d, device_id: 0xa80a
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   class_code: 010802
Nov 29 04:36:54 Anton kernel: {7811}[Hardware Error]:   bridge: secondary_status: 0x0000, control: 0x0000

 

anton-diagnostics-20221201-1010.zip

Through trail and error off pulling hardware, booting, and checking logs, I believe I found the issue. It appears to have been my cheap NVME to PCIe cards.