Redington Posted January 19, 2023 Share Posted January 19, 2023 Hi Team, I have a question on drivers for a R9 390X AMG gpu PCIe. I have by default loaded Do i need both or should i remove one. Unraid build id 6.9.2. I'm trying to utilise the GPU for frigate & any other docker that needs this. The above was using ls -la /boot/config/modprobe.d/ in the terminal to call the drivers. I seem to have a bit of a problem with support in unraid with any AMD devices. not sure why this is. Platform is CPU 3800x R7, GPU R9 390X 8GB, MB ASUS Prime B450, TPU Coral, RAM 16GB 3200MHZ. Quote Link to comment
Redington Posted January 22, 2023 Author Share Posted January 22, 2023 (edited) is this normal for a AMD R9 390x in unraid?? Edited January 22, 2023 by Redington Quote Link to comment
Redington Posted February 15, 2023 Author Share Posted February 15, 2023 Is the radeon driver the correct one to use or is amdgpu the better driver?? below is a dump of terminal commands looking at GPU. sudo lshw -c video *-display description: VGA compatible controller product: Hawaii XT / Grenada XT [Radeon R9 290X/390X] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:08:00.0 version: 80 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:87 memory:e0000000-efffffff memory:f0000000-f07fffff ioport:e000(size=256) memory:fcf00000-fcf3ffff memory:c0000-dffff lspci -k | grep -EA2 'VGA|3D' 08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] (rev 80) Subsystem: ASUSTeK Computer Inc. Radeon R9 390X Kernel driver in use: radeon Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.