fartmaster Posted March 13, 2023 Share Posted March 13, 2023 Hey forum, posting here as suggested by the Fix Common Problems plugin. My server seems to be having hardware problems and I can't figure out the cause of the issue. My server will either spin down the array or freeze completely every 30-60 minutes, any ideas? Rather new to Unraid and servers in general, can't read the syslog at all. tower-diagnostics-20230313-1952.zip Quote Link to comment
JorgeB Posted March 13, 2023 Share Posted March 13, 2023 Enable the syslog server to see if catches something but based on the description it looks more like a hardware issue. Quote Link to comment
fartmaster Posted March 13, 2023 Author Share Posted March 13, 2023 Syslog server doesn't seem to be picking anything up, very confused as 95% of my hardware is almost brand new. Starting to get a little concerned lmao Quote Link to comment
JorgeB Posted March 13, 2023 Share Posted March 13, 2023 One thing you can try is to boot the server in safe mode with all docker/VMs disabled, let it run as a basic NAS for a few days, if it still crashes it's likely a hardware problem, if it doesn't start turning on the other services one by one. Quote Link to comment
fartmaster Posted March 14, 2023 Author Share Posted March 14, 2023 So I've done what you suggested, no crashes or freezes after server has been running for 8 hours. Parity-sync is at 50% when it never usually gets past 10-15%. I'd say at this stage it's a pretty good guess to say it's a docker or plugin I have installed. Thanks for the suggestion, I will do what you suggested and turn everything back on 1 at a time to pin point what's causing issues. Quote Link to comment
Solution fartmaster Posted March 15, 2023 Author Solution Share Posted March 15, 2023 So I let my parity-sync finish and started up my dockers one at a time, everything ran fine until I started the Plex Docker. About 30 minutes after starting the Plex Docker my server crashed. Uninstalled Plex and removed it completely, installed the binhex-PlexPass Docker instead and haven't seen any issues since. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.