Rkpaxam Posted March 25, 2023 Share Posted March 25, 2023 (edited) Hi All of a sudden my Docker and unraid server have started running really slow, i have checked CPU and ram usage and both are fine. It take 5+ mins to unpack a docker, frequently times out on the web gui. Starting/stopping contrainers is the same it takes ages and then i get container has already started/stopped or doesn't exist What could cause this? Edited March 25, 2023 by Rkpaxam Missed Quote Link to comment
-MacGyver- Posted March 25, 2023 Share Posted March 25, 2023 What you describe in your initial post sounds like network issues. At the very bottom of your screenshot are very slow bond0 inbound/outbound speeds. Have you done an iperf test, both directions, to rule out network issues ( Full disclosure - I haven't used that tool, can't help on setup, operation ) Quote Link to comment
Rkpaxam Posted March 25, 2023 Author Share Posted March 25, 2023 i have a 500MB connection and have tested no issues with Network. If it helps it started from a powercut last night? Quote Link to comment
Rkpaxam Posted March 25, 2023 Author Share Posted March 25, 2023 (edited) this is the Main issue, its takign its sweet a** time doing this and i cant access the Nas from any other tab its completely kills it. Edited March 25, 2023 by Rkpaxam Spelling again Quote Link to comment
Rkpaxam Posted March 25, 2023 Author Share Posted March 25, 2023 mercia-nas-diagnostics-20230325-1543.zip mercia-nas-syslog-20230325-1544.zip Quote Link to comment
-MacGyver- Posted March 25, 2023 Share Posted March 25, 2023 You mentioned the unRAID webgui and docker restarts are slow in your initial post. These are internal and your internet connection has no impact on. The iperf test is to test your internal network. Still suggest you test the network. If this was after a power cut restart all of your network equipment. Some part may not have come online properly. With all network equipment turned off, turn back on in the order of modem, router and then any switches. Wait until each has stabilized before continuing to the next. Quote Link to comment
Rkpaxam Posted March 25, 2023 Author Share Posted March 25, 2023 Ive Restarted everything today and nothing changed, ive mad sure everything is "moved" im just running a parity check. Ive done a test on the Cache drive to make sure there are no errors but it is still happening . i cant find Iperf but appently its built in? Quote Link to comment
Rkpaxam Posted March 26, 2023 Author Share Posted March 26, 2023 gave up in the end and built the system again must of been a corrupted usb Quote Link to comment
hot22shot Posted March 26, 2023 Share Posted March 26, 2023 A little bit too late but you could check that your docker.img file is on your cache and not on your disk. According to your diagnostic files you had some file(s) from your system share that was/were on your disk2 instead of cache : Quote system shareUseCache="prefer" # Share exists on cache, disk2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.