When looking in Settings > Network, Interface eth0 reports a mac of 70:58:00:00:00:01 HOWEVER, when looking in my unifi clients I see this unknown mac address of b2:24:00:00:00:5c that has the ip and switch port mapping as my Unraid server. If I block mac 70:58:00:00:00:01 I can still access the gui but if I block b2:24:00:00:00:5c, I immediately cannot access the Unraid Gui.

 

Any thoughts?

 

Update

Did some digging and found the following when ran ifconfig (ive modified the MAC addresses for public posting)

eth0: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500

        ether 70:58:00:00:00:01  txqueuelen 1000  (Ethernet)

        RX packets 237192771  bytes 210661360859 (196.1 GiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 189551710  bytes 82347919550 (76.6 GiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

bond0: flags=5443<UP,BROADCAST,RUNNING,PROMISC,MASTER,MULTICAST>  mtu 1500

        ether 70:58:00:00:00:01  txqueuelen 1000  (Ethernet)

        RX packets 237192771  bytes 210661360859 (196.1 GiB)

        RX errors 0  dropped 4916  overruns 0  frame 0

        TX packets 189551710  bytes 82347919550 (76.6 GiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.57.175  netmask 255.255.255.0  broadcast 0.0.0.0

        ether 70:58:00:00:00:01  txqueuelen 1000  (Ethernet)

        RX packets 234627773  bytes 207436546508 (193.1 GiB)

        RX errors 0  dropped 1172  overruns 0  frame 0

        TX packets 184221561  bytes 81852227063 (76.2 GiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

shim-br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.57.175  netmask 255.255.255.255  broadcast 0.0.0.0

        inet6 fe80::b03c:abff:1111:5c5c  prefixlen 64  scopeid 0x20<link>

        ether b2:24:00:00:00:5c  txqueuelen 1000  (Ethernet)

        RX packets 1888063  bytes 1182435586 (1.1 GiB)

        RX errors 0  dropped 408  overruns 0  frame 0

        TX packets 566203  bytes 689037239 (657.1 MiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

Anybody able to give a rundown of why networking is done like this in Unraid?

Edited June 18, 20233 yr by GeoSnipes

Found a discussion that answer my questions: 

[6.9.0-BETA25] HOST ACCESS TO CUSTOM NETWORKS" OPTION IN DOCKER CHANGES MAC ADDRESS OF UNRAID SERVER

 

Edited June 18, 20233 yr by GeoSnipes