July 7, 20232 yr I get the normal "Do you wish to Proceed" prompt when clicking on STOP ARRAY, but nothing happens. There are errors in the log (attached). It will reboot, it will shutdown, but it won't respond to stopping the array. I want to add a new cache drive into my pool Help? syslog-2.txt
July 8, 20232 yr Community Expert emhttp is segfaulting, also some disk issues, reboot in safe mode, start array, try to stop array, post new diags if it still fails.
July 8, 20232 yr Author In the interim, I had simply selected Reboot and then after the reboot automatically went into Parity Check. FYI, prior to these issues, there was a disabled drive that I just replaced and had data rebuilt on the new drive. All seemed well after the rebuild until I tried pausing the array. Anywho, I will see how the Parity Check has any bearing on the disk errors you mentioned; the GUI otherwise shows all disks up with no errors.
July 11, 20232 yr Author UPDATE: It's been a couple days since parity finished and so far, everything is working normally, I can stop the array at wil, and the syslog shows no appeciable errors. This does bring up what I believe is a serious gap in UnRAID functionality: if there was indeed some underlying drive issue as reported in the log that prevented the array from being manually stopped, then this potential unsafe situation is not recognized by UnRAID as there were no other errors reported in the GUI or drive information and attributes sections, nor did UnRAID respond expectedly or provide any messages indicating something was amiss or that it couldn't handle the user request. Edited July 11, 20232 yr by Auggie
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.