August 1, 20232 yr disc 5 just got disabled, i rebooted, removed it from the array, start maintenance mode, readd it and then it totally disappears, unable to see it in unassigned devices and it doesnt show in the pool, 5 slot shows unassigned it is detected by the bios on reboot tower-diagnostics-20230801-0800.zip
August 1, 20232 yr Community Expert The diagnostics show what look like connection issues for /dev/sdg which I assume is disk5 and then it disappears. Aug 1 00:01:06 Tower kernel: ata6.00: configured for UDMA/133 (device error ignored) Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 Sense Key : 0x5 [current] Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 ASC=0x21 ASCQ=0x4 Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 Aug 1 00:01:06 Tower kernel: I/O error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Aug 1 00:01:06 Tower kernel: Buffer I/O error on dev sdg, logical block 0, async page read Aug 1 00:01:06 Tower kernel: ata6: EH complete Aug 1 00:01:06 Tower emhttpd: error: ckmbr, 2291: Input/output error (5): read: /dev/sdg Aug 1 00:01:06 Tower emhttpd: ckmbr error: -1 Aug 1 00:01:06 Tower kernel: mdcmd (6): import 5 Aug 1 00:01:06 Tower kernel: md: import_slot: 5 empty I would suggest you carefully check that cabling to the drive (both power and SATA) is well seated and try again.
August 1, 20232 yr Author 3 minutes ago, itimpi said: The diagnostics show what look like connection issues for /dev/sdg which I assume is disk5 and then it disappears. Aug 1 00:01:06 Tower kernel: ata6.00: configured for UDMA/133 (device error ignored) Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=0s Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 Sense Key : 0x5 [current] Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 ASC=0x21 ASCQ=0x4 Aug 1 00:01:06 Tower kernel: sd 6:0:0:0: [sdg] tag#5 CDB: opcode=0x88 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 Aug 1 00:01:06 Tower kernel: I/O error, dev sdg, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 Aug 1 00:01:06 Tower kernel: Buffer I/O error on dev sdg, logical block 0, async page read Aug 1 00:01:06 Tower kernel: ata6: EH complete Aug 1 00:01:06 Tower emhttpd: error: ckmbr, 2291: Input/output error (5): read: /dev/sdg Aug 1 00:01:06 Tower emhttpd: ckmbr error: -1 Aug 1 00:01:06 Tower kernel: mdcmd (6): import 5 Aug 1 00:01:06 Tower kernel: md: import_slot: 5 empty I would suggest you carefully check that cabling to the drive (both power and SATA) is well seated and try again. sorry disk 5 serial number ends R1YK if that helps identify it? I did move my server last night to be higher in my rack (it was powered down) as i added a UPS to the rack but i did reseat the cabling to the drives then but i will try reseat it again
August 1, 20232 yr Author 11 minutes ago, Mattlevant said: sorry disk 5 serial number ends R1YK if that helps identify it? I did move my server last night to be higher in my rack (it was powered down) as i added a UPS to the rack but i did reseat the cabling to the drives then but i will try reseat it again okay so i have reseated all my drives again and it is now showing in the array and rebuilding the drive
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.