October 20, 20232 yr I had a motherboard fail (MSI tx40 pro wifi) i replaced it with the exact same model board, i believe i setup the bios the same as the old one but now when i boot to unraid it cant find the drives and i see the following error when i check. root@Milkyway:~# dmesg | grep mpt [ 0.000000] Device empty [ 0.000000] Dynamic Preempt: voluntary [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 9.930308] mpt3sas version 43.100.00.00 loaded [ 9.931977] mpt3sas 0000:02:00.0: enabling device (0000 -> 0002) [ 9.935082] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (65729152 kB) [ 26.082751] mpt2sas_cm0: sending diag reset !! [ 59.489121] mpt2sas_cm0: diag reset: SUCCESS [ 64.503820] mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! [ 64.504921] mpt2sas_cm0: doorbell handshake int failed (line=7049) [ 64.506016] mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) [ 64.507206] mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:12348/_scsih_probe()! any help would be appreciated as am not sure what i am missing milkyway-diagnostics-20231020-1138.zip
October 20, 20232 yr Try a different PCI slot, if the same try the HBA in a different board if available to confirm it's still good.
October 20, 20232 yr Author I have tried a few different slots, so i guess i'll need to try it in another pc then if there's nothing else we can check on this one
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.