January 11, 20242 yr Hi, So I first had a small server setup to try unraid, now I have built myself a full NAS with some nice components and more drives. Everything has changed, only one unassigned data drive is being re-used, it will be temp mounted to transfer data to the array then reformatted and added to the array. Now, when i powered down my old server, took out the USB key (from my understanding the license is tied to the USB) and put it in new, booted up and chose "New config" to clear everything (no configs, vms, dockers should be kept, I am re-setting up everything). I have 3 1tb drives SSD/M.2 drives as cache, and currently 1 8tb drive as main drive, a new parity drive is on its way and more 8tb drives, I will add those later. Now all the drives are setup and formated and I created a data share (per TrASH guides etc) and was proceeding to turn on dockers, and it complains the appdata folder is missing, isn't this setup by default by unraid? All the others are there, domains, iso etc. I also tried resetting unraid again with New config and rebooting etc, no change. Can I simply create this folder manually? Its appdata, on the cache drives, nothing other special about these folder right? I am worried I am missing something that will bite me later when I have re-installed everything. I would appreciate some advice.
January 11, 20242 yr Community Expert Merged your threads. Please don't post in multiple threads about the same thing. It makes it impossible to coordinate responses. Attach diagnostics to your NEXT post in this thread.
January 11, 20242 yr Author Sorry I first made a post without a user, and I have no idea where it ended up so I created a user and made a new post. Attached is the diagnostics. tower-diagnostics-20240111-1347.zip
January 11, 20242 yr Community Expert 4 minutes ago, Affra said: no idea where it ended up We get a lot of spammers, so there are restrictions on new forum users until they get approved. You have been approved now. You can get to your post history by clicking on your username.
January 11, 20242 yr Community Expert Solution Sorry, looking at wrong diagnostics again. Your appdata user share should get created when you enable docker.
January 11, 20242 yr Author You right, it was created now when I enable docker, maybe it did that before as well when I set this up. So I should be good to proceed then, thank you.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.