January 17, 20242 yr Hello all, I have been using Unraid for a few years now mainly for Plex and one baremetal VM, always the latest version of Unraid. I have an opnsense network that has several VLANs: 192.168.1.1 - Main 10.10.10.1 - HomeWireless 10.10.20.1 - Smart Home Devices 10.10.30.1 - VPN 10.10.40.1 - CCTV I've always had my Unraid server @ a static 192.168.1.190 I've never really understood or have been able to get Dockers to run correctly in Unraid on the VLANs For instance: I would like for my Plex docker to be on the 10.10.10.1 VLAN. I would like my Home Assistant on 10.10.20.1 VLAN. I would like my Shinnobi on 10.10.40.1 VLAN. But anytime I start assigning the Dockers to the specific VLANs, I cannot access there GUI's from unraid manage portal. Some of them I can access if I connect to that specific network but never from the main network. I am assuming I have some fatal flaw in my initial configuration of Unraid? I can post pictures of my setup sometime tomorrow, currently the system is down, transitioning into a N3 Jonsbo case. The specs of the current system are: Phantom B550 itx 5950x 64gb ram 3060 12gb Array - x1 16tb HDD, x2 8tb HDD, x1 2tb HDD Cache - 500GB WD 2.5 sata ssd Baremetal - 2tb nvme ssd, 2tb HDD SFX corsair 750 psu Orico nvme to x6 sata card Thank you so much for any help on this : ) Josh
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.