Meowcat285 Posted January 23 Share Posted January 23 When I run a parity check on 6.12.6, it seems to be significantly slower then 6.12.4. Previously I would get about 100 MB/sec on the check, but now I cant get more then 8 MB/sec even with no other IO activity. I attached the diagnostics to this post, so if anyone can see any issue, help would be very much appreciated. tower-diagnostics-20240123-1105.zip Quote Link to comment
Meowcat285 Posted January 23 Author Share Posted January 23 I have also used the DiskSpeed docker to test the drive performance, and even when other IO is being performed, its over 120 MB/sec at least. Quote Link to comment
Meowcat285 Posted January 23 Author Share Posted January 23 In addition, mover seems to be very slow as well. Quote Link to comment
JorgeB Posted January 23 Share Posted January 23 There are writes going on to disks 3, 4 and 5, stop all array activity and retest. Quote Link to comment
Meowcat285 Posted January 23 Author Share Posted January 23 It seems to be going faster now, not sure why, there's still activity on the disks. Quote Link to comment
JorgeB Posted January 23 Share Posted January 23 Try stopping all docker containers/VMs. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.