January 31, 20242 yr I upgraded the hardware and im now using a Gigabyte B760M-C, intel i7 14700k and 64 gigs of ram. For a while now I've had a disk thats shown SMART errors and i finally got a drive via RMA that works (2 previous DOE) Im using a Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (9600i-16 flashed IT) Currently, my rebuild is going @ 4.1mb a sec, 27 days to go 😵 I been searching the forums and i've done a few things, one, check bios for PIC speeds, so far ive done 4.0, 3.0 and auto with no difference in speeds. Ive changed physical PCI-E ports and im using the recommended port for a GPU according to the gigabyte but i also tried the second PCI port. This port, upon boot, gives me a ton of errors, here a copy+paste from the log. "Jan 31 07:48:07 Tower kernel: pcieport 0000:01:00.0: [ 0] RxErr Jan 31 07:48:07 Tower kernel: pcieport 0000:00:01.0: AER: Corrected error received: 0000:01:00.0 Jan 31 07:48:07 Tower kernel: pcieport 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) Jan 31 07:48:07 Tower kernel: pcieport 0000:01:00.0: device [10b5:8724] error status/mask=00000001/0000a000" this error seems to fill up my log but the system still boots (FCP warns me of this - /var/log is getting full (currently 100 % used) The supposed "slower" port that would only run @ 4x didnt give me any errors. Theres no way i can wait a month almost and hope there arent any power issues, or anything else, that would cause me not to have to start the data rebuild all over. To note, i still have the drive with errors, just no connected. Help? tower-diagnostics-20240131-1412.zip
January 31, 20242 yr Author another note. the second i posted this (of course) it shot up to over 142.3mb.... then it froze. system is no longer responding so i shut it down via the power button and moved the LSI card to different slot. data rebuild started again @ 3.9 mbs. new diagnostics posted added. tower-diagnostics-20240131-1432.zip Edited January 31, 20242 yr by blackb0x13
February 1, 20242 yr Community Expert You can try this first for the PCIe error: https://forums.unraid.net/topic/118286-nvme-drives-throwing-errors-filling-logs-instantly-how-to-resolve/?do=findComment&comment=1165009
February 25, 20242 yr Author hey sorry for the ridiculously late reply. I have moved the LSI card to the other slot and limited the speed in the bios for PCIE4 which hasnt caused any issues, however, did you mean this "pcie_aspm=off " from your post?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.