uncleiven Posted February 15 Share Posted February 15 About a week ago I noticed I was getting this alert (see attached) which suggested an issue with my boot flash drive. Another recommendation I found was to do a server reboot as it had been up for around 3 months. I noticed 6.12.7-rc2 was available to download, so I thought I'd do the update and complete a reboot in one process - I also did a Flash Back up (yesterday) My issue is that once unRAID boots up I can see on a monitor connected to the server it gets to the end of the process showing it's IP address, OS version etc, however I can't load the GUI to actually log into the OS. I have tried a few different things, which included using the USB creator on 3 other flash drives to load my backup ZIP but when I try and boot from them (forcing it via BIOS) it just wont boot at all (MB is an MSI Pro). Any more ideas or suggestions, please? Quote Link to comment
uncleiven Posted February 15 Author Share Posted February 15 To add, I've tried the old and new flash drives in various USB2 and USB3 ports, still no good. Quote Link to comment
Solution itimpi Posted February 15 Solution Share Posted February 15 Have you tried creating the flash drive using the Manual install method. In my experience it is more reliable than using USB Creator. Quote Link to comment
uncleiven Posted February 15 Author Share Posted February 15 15 minutes ago, itimpi said: Have you tried creating the flash drive using the Manual install method. In my experience it is more reliable than using USB Creator. No, but I will give that a try now. Thanks Quote Link to comment
uncleiven Posted February 15 Author Share Posted February 15 19 minutes ago, itimpi said: Have you tried creating the flash drive using the Manual install method. In my experience it is more reliable than using USB Creator. Life saver... that worked and I am back online, license transferred..... NOW BREATH haha Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.