Every check has lots of errors

[AlbertoGa]

How can I find out if it's a read failure?

9 minutes ago, itimpi said:

Has it failed with an indication there was a read failure?   If so you can probably make a warranty claim.

 

note that the SATA overall health assessment takes no account of the effect of running tests.   It is based purely on whether any of the attributes have a “failing now” status so is frequently not a useful indication of failure.

 

[itimpi]

Just now, AlbertoGa said:

How can I find out if it's a read failure?

It is the result of the test in the SMART information for the drive.  Does it say something like "Read Failure 90%" indicating it failed at 90% through the test.

[AlbertoGa]

23 minutes ago, itimpi said:

It is the result of the test in the SMART information for the drive.  Does it say something like "Read Failure 90%" indicating it failed at 90% through the test.

 

[AlbertoGa]

31 minutes ago, itimpi said:

It is the result of the test in the SMART information for the drive.  Does it say something like "Read Failure 90%" indicating it failed at 90% through the test.

The Failed collumn says Never

[itimpi]

According to your screen shot there is still an Extended SMART test running (bottom left image).

 

The FAILED column in the upper image is normally irrelevant unless it say something like "Failing Now"

[AlbertoGa]

11 minutes ago, itimpi said:

According to your screen shot there is still an Extended SMART test running (bottom left image).

 

The FAILED column in the upper image is normally irrelevant unless it say something like "Failing Now"

Yes , I've been reattempting the test. Is there anything there that would indicate the problem is this drive? Just so I can use it when claiming warranty