July 17, 20242 yr I want to reduce the physical size of my unRAID server. In that connection, it didn't take long from thought to purchase when I saw the Jonsbo N3 cabinet. The plan is to build a new server in the Jonsbo N3 cabinet, when it is fully assembled, my current setup will be shut down and the parts sold. My current setup has been rock solid, so I haven't kept up to date with what's available, so I need input to that extent. The desire is as follows. - 8 HDD of 8TB incl. 1x Parity drive (will probably be Seagate Ironwolf as parity and Barracuda as data drives) - 1 SSD as cache drive, either 2.5" or onboard M2 (500GB+) - Motherboard ITX with option for 8 sata connections + M2 for cache drive / MB with 9 sata connections if cache drive becomes a traditional SSD 2.5" SSD drive. - PSU: Only knows it has to be SFX. - Docker Plex Media Server + a backup thing similar to Onedrive. - Only streaming to the house's two televisions. (4K) - Something which, in terms of performance, is at least on par with what I have now. - I am open to finding a second hand Motherboard. My current setup. CASE: Corsair Obsidian 900D CPU: Intel® Core™ i5-3570K CPU @ 3.40GHz RAM: Kingston ValueRAM 2 x 4 GB DDR3 1600mhz MB: ASRock B75 Pro3-M PSU: Corsair CX600 V2 DRIVE CAGE: Raidsonic IB-544SKK OS: 6.12.10 (Unraid OS Pro) SATA Expansion Card(s): LyCom PE-120 4 port + Syba SI-PEX40071 8 port (aka iocrest IO-PCE9705-8I) USB-KEY: Sandisk Cruzer Fit 4GB Cache Drive: 128GB Intenso SSD Parity Drive: Seagate Ironwolf 4TB Data Drives: 11x a mix of WD - Seagate - Toshiba Docker: Plex media server Usage: Storage for video and music + laptop backup Edited July 20, 20242 yr by KeBo77 I've bought another case.
July 17, 20242 yr I hate to say this but this case just doesn't easily allow what is needed. I bought the Jonsbo N3 when it first came out and it sits unused with motherboard in it. I was waiting for soemthing better to come on market to support everything I wanted. 10gb networking 8hdd support I want 2 cache drives. I am going to be following this post as today I decided to start looking again.
July 18, 20242 yr Author My new build, working title JO-N3 CASE: Jonsbo N3 CPU: Intel® Core™ i3-12100 Alder Lake RAM: 32GB (2x16) Corsair Vengeance LPX DDR4-3200 MB: ASRock B760M-itx/D4 PSU: Chieftec CSN-450C OS: SATA Expansion Card: M2 SATA adapter (5-6 data ports) USB-KEY: SanDisk Ultra Fit - 64GB - USB Stick Cache Drive: WD Red SA500 NAS SSD - 1TB - SATA-600 - 2.5" Parity Drive: Seagate Ironwolf 8TB Data Drives: 7x Seagate Barracuda ST8000DM004 Docker: Plex media server Usage: Storage for video and music + laptop and photo backup Edited July 19, 20242 yr by KeBo77
July 20, 20242 yr Author I'm not quite there. It seems that the Barracuda ST8000DM004 uses SMR technology, which seems to be a NO NO in unRAID. Hmm what to do?
July 20, 20242 yr 3 minutes ago, KeBo77 said: I'm not quite there. It seems that the Barracuda ST8000DM004 uses SMR technology, which seems to be a NO NO in unRAID. Hmm what to do? It's fine for a data drive, but not great for a parity drive.
July 20, 20242 yr Author On 7/18/2024 at 1:56 AM, LordOMighty said: I hate to say this but this case just doesn't easily allow what is needed. I bought the Jonsbo N3 when it first came out and it sits unused with motherboard in it. I was waiting for soemthing better to come on market to support everything I wanted. 10gb networking 8hdd support I want 2 cache drives. I am going to be following this post as today I decided to start looking again. I've canceled all my orders. I've ordered the Sagittarius 8 Bay Nas case from Aliexpress instead. Room for bigger fans (better airflow) and there's room for a M-ATX motherboard.
July 22, 20242 yr I downsized from a Fractal Define 7 case that was just too big (and very heavy) to a Jonsbo N3 with an ASRock Z690M-ITX/ax (mITX) motherboard, i3-13100T CPU, 64GB RAM and a couple of NVMe/m.2-to-6-port-SATA cards. I also picked up a couple of dual 2.5" disk PCI Slot "adapters" and installed an additional 4 x 2.5" SATA SSDs in the two empty rear case slots (together with another couple of 2.5" SATA SSDs screwed into the existing inner case rails). Connecting everything up was a bit tricky due to limited space and I also needed to purchase some SATA-to-SATA power extension leads and some SATA-to-MOLEX adapters too. Routing the many SATA cables also requires a bit of careful organisation. Overall, I think the result is excellent, although I have used both NVMe/m.2 slots on the motherboard for SATA controllers but for my workloads, a couple of ZFS Pools (mirror & raidz1) provide the performance I need. I "could" just about utilise the x16 PCIe slot on the motherboard by moving one pair of 2.5" SATA SSDs to sit on top of the PSU (there's just enough room using double-sided sticky tape) or this space could be used to add another couple of 2.5" SATA SSDs - making the case "totally" full (8 hot-swap HDDs plus 8 SATA SSDs). I also replaced the pair of Jonsbo fans with Noctua fans and installed the "Dynamix Auto Fan Control" plugin which keeps the fans spun down unless the HDD temps start to rise. It's virtually silent with the HDDs and case fans spun down (the CPU fan does spin all the time but is very very quiet). I do agree, the N3 case only supports mITX but my understanding is that Jonsbo are bringing out the N5 case which will support 12 x hot-swap 3.5" disk bays and ITX, mITX and mATX sized motherboards too.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.