Aimzor Posted July 20 Share Posted July 20 Good afternoon, All, I've been running this software for the past couple of years without a single issue, until now. If anyone has previously dealt with the "Your flash drive is corrupted or offline" issue, I would very much appreciate some guidance. I'm currently trying other ports, I'll update my post as I work through that process. I did try to repair the USB drive on my desktop PC, but no luck. I also attempted to copy the contents of the boot drive to another flash drive, also unsuccessful. It could have been user error or perhaps there are some other restrictions there that I am not aware of. Thanks in advance. aimzornas-diagnostics-20240719-1415.zip Quote Link to comment
JorgeB Posted July 20 Share Posted July 20 Jul 19 11:12:27 AimzorNAS kernel: usb 4-1: device not accepting address 6, error -71 Jul 19 11:12:27 AimzorNAS kernel: usb usb4-port1: unable to enumerate USB device Jul 19 11:12:27 AimzorNAS emhttpd: Unregistered - flash device error (ENOFLASH3) 1 hour ago, Aimzor said: I'm currently trying other ports Do that, make sure you try a USB 2.0 port if available, if issue persists replace the flash drive. Quote Link to comment
Aimzor Posted July 20 Author Share Posted July 20 Thanks, Jorge, is there a job aid for making additional copies of the flash drive just so I've got a backup kicking around just in case? Quote Link to comment
JorgeB Posted July 20 Share Posted July 20 You just need one current backup, i.e., after any changes to the config. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.