I attached a screenshot of my ZFS pools from the main page, and diagnostics. As you can see all the disks are marked as new...they are not new, not a single one.

The "cache-nvme" disk is marked as new and that it will be formatted, it is also not new. Plus it has yet to be formatted, when I'm able to start the array it works fine, despite still being marked as new. Thats been that way for about a week, but never caused any issues.

Last night I had to do a new config because my main pool was claiming it was missing too many disks so the array couldn't start. Except the pool wasn't missing any disks.. 

The pool labeled "zfs-m2tb" has Unraid claiming it has missing disks when I try to start the array. But there are no missing disks, and both are perfectly fine. This pool has never given me issues at all.

The main pool does have one failing disk (sdh1), a replacement is on the way but that has never prevented me from running in a degraded state. And it also has nothing to do with the other two pools giving me trouble. 


I'm not 100% sure what to do here

serverus-diagnostics-20241109-1013.zip

UPDATE:

I created a new config, placed all drives into the exact same slots, with the exact same file system and settings. The array is up and everything is running fine, except `sdh1` but I already know about that. 

Attached is another screenshot except with the drives mounted now, and I attached another diagnostics taken immediately after start the array with the new config. 
 

UPDATE:

Everything is still the same except I find it hilarious that all the sudden `sdh1` is fine again. I hate Seagate drives lol. 

Plus, "One or more devices has experienced an unrecoverable error", yet all disks are online and the pool is not degraded...
 

pool: skydrift
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
	attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
	using 'zpool clear' or replace the device with 'zpool replace'.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P
  scan: resilvered 82.7G in 00:16:42 with 0 errors on Sat Nov  9 10:44:18 2024
config:

	NAME           STATE     READ WRITE CKSUM
	skydrift       ONLINE       0     0     0
	  mirror-0     ONLINE       0     0     0
	    /dev/sdl1  ONLINE       0     0     0
	    /dev/sdm1  ONLINE       0     0     0
	  mirror-1     ONLINE       0     0     0
	    /dev/sdj1  ONLINE       0     0     0
	    /dev/sdi1  ONLINE       0     0     0
	  mirror-2     ONLINE       0     0     0
	    /dev/sdg1  ONLINE       0     0     0
	    /dev/sdh1  ONLINE       0     0     2
	  mirror-3     ONLINE       0     0     0
	    /dev/sdb1  ONLINE       0     0     0
	    /dev/sde1  ONLINE       0     0     0
	  mirror-4     ONLINE       0     0     0
	    /dev/sdc1  ONLINE       0     0     0
	    /dev/sdf1  ONLINE       0     0     0
	  mirror-5     ONLINE       0     0     0
	    /dev/sdd1  ONLINE       0     0     0
	    /dev/sdk1  ONLINE       0     0     0

errors: No known data errors

serverus-diagnostics-20241109-1035.zip

Edited November 9, 20241 yr by relink
Added Pool Status

Re-import all the pools again, but this time leave the fs set to auto for all.

3 minutes ago, JorgeB said:

Re-import all the pools again, but this time leave the fs set to auto for all.

Do you mean just create a "new config", put the drives in the same slots, but instead of specifying the format and layout just leave it set to auto and don't change anything? Or do you mean the do a zpool export via the cli? 

17 hours ago, relink said:

Do you mean just create a "new config", put the drives in the same slots, but instead of specifying the format and layout just leave it set to auto and don't change anything?

Correct.

Worked perfectly, thank you.