January 12, 20251 yr Upgraded to 7.0 stable, and now I have a weird thing where my Dockers start fine after a clean boot, then will stop and the tab shows "Docker Service failed to start." If I reboot, it's fine again for about 20-30 mins. Any ideas before I try a downgrade? unbeaver-diagnostics-20250112_1740.zip
January 13, 20251 yr Community Expert Jan 12 05:16:32 unbeaver kernel: nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10 Jan 12 05:16:32 unbeaver kernel: nvme nvme0: Does your device have a faulty power saving mode enabled? Jan 12 05:16:32 unbeaver kernel: nvme nvme0: Try "nvme_core.default_ps_max_latency_us=0 pcie_aspm=off pcie_port_pm=off" and report a bug Jan 12 05:16:32 unbeaver kernel: nvme0n1: I/O Cmd(0x2) @ LBA 258541272, 8 blocks, I/O Error (sct 0x3 / sc 0x71) Jan 12 05:16:32 unbeaver kernel: I/O error, dev nvme0n1, sector 258541272 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Jan 12 05:16:32 unbeaver kernel: nvme 0000:0a:00.0: enabling device (0000 -> 0002) Jan 12 05:16:32 unbeaver kernel: nvme nvme0: Disabling device after reset failure: -19 NVMe device is dropping offline, try adding these options to syslinx.cfg and retest.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.