January 28, 20251 yr I recently got a H12SSL-i board along with an EPYC 7402P and 256GB of RAM. I’m on Unraid 7.0.0 and my previous board booted without any issues. I was using an ASUS STRIX B450-F Gaming with a Ryzen5 2600. When booting on the SM board It freezes after the loading bz root stage when it would normally begin showing the syslog and actually booting Unraid. I am using a dedicated GPU because the onboard VGA doesn’t work for the reason below. MASSIVE DISCLAIMER: I’m one of the lucky ones who had the VRM for the BMC burnout the very first time I plugged the board in. Yay me. I’m in contact with the seller and SuperMicro already. So while I wait to hear from SuperMicro I wanted to see if the board was atleast stable without a functional BMC. So far it’s looking like it’s not, but also maybe… I was able to boot into a live Ubuntu session which seemed to run fine for the short amount of time I used it. So I’m trying to figure out if Unraid isn’t booting because of a BIOS setting or something I need to change on my USB. Or if Unraid isn’t booting because of the damaged BMC.
January 28, 20251 yr See if it boots with a another flash drive using a stock install, if still not, it's likely a board problem, since there are other users using that model.
January 28, 20251 yr Author I didn’t even consider just making a fresh USB to test with😅 Ill give that a shot and see if I’m able to boot.
January 28, 20251 yr Author Sorry it took me so long to reply. I tried a brand new fresh USB and still froze at the exact same spot.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.