Gave it a shot since 7.2 released and I hadn't tried since 7.0 and 7.1.

Still getting the same crashes. If I rever to 6.12.15 the server can run perfectly fine forever. Diagnostics attached, please help.

ryanflix-diagnostics-20251101-2133.zip

Btrfs is finding data corruption on both pool devices; this is typically a RAM problem:

Oct 31 10:21:47 RyanFlix kernel: BTRFS info (device nvme0n1p1): bdev /dev/nvme0n1p1 errs: wr 0, rd 0, flush 0, corrupt 509, gen 0

Oct 31 10:21:47 RyanFlix kernel: BTRFS info (device nvme0n1p1): bdev /dev/nvme1n1p1 errs: wr 0, rd 0, flush 0, corrupt 509, gen 0

But looks like you are using ECC RAM, scrub the pool and post the results from the GUI

On 11/2/2025 at 4:02 AM, JorgeB said:

Btrfs is finding data corruption on both pool devices; this is typically a RAM problem:

Oct 31 10:21:47 RyanFlix kernel: BTRFS info (device nvme0n1p1): bdev /dev/nvme0n1p1 errs: wr 0, rd 0, flush 0, corrupt 509, gen 0

Oct 31 10:21:47 RyanFlix kernel: BTRFS info (device nvme0n1p1): bdev /dev/nvme1n1p1 errs: wr 0, rd 0, flush 0, corrupt 509, gen 0

But looks like you are using ECC RAM, scrub the pool and post the results from the GUI

UUID:             b9cb5a6f-abae-436e-863a-18c9dfed7085
Scrub started:    Mon Nov  3 06:40:38 2025
Status:           finished
Duration:         0:04:54
Total to scrub:   403.88GiB
Rate:             1.37GiB/s
Error summary:    csum=82
  Corrected:      0
  Uncorrectable:  82
  Unverified:     0

Look in the syslog, and it should list the corrupt files detected during the scrub, those should be all deleted/restore from a backup, then run a another scrub to confirm 0 errors, after that reset the pool state and keep monitoring for a few days, any more new errors there's likely a hardware issue.