August 20Aug 20 I had a physical drive become unavailable due to a port failure on the motherboard. I've pulled the drive out and mounted it to another system and all of the data is still intact and everything looks good.I've physically put the drive back in the server, connected it to a different SATA port and now trying to figure out the best way to proceed. The original location for the drive was Disk 1. That location now shows unassigned. When I choose the correct hard drive (based on serial number) for disk 1, I get a warning that says “All existing data on this device will be OVERWRITTEN when array is Started”I started the array up without disk 1 assigned and checked the shares and all of the data appears to be emulating correctly. Assuming my two options are to rebuild that data on disk 1 from parity or keep the original data on disk 1 and rebuild parity. This is my first time having to deal with an array that isn't just working as normal so I'm a bit worried I'm gonna screw something up. (thankfully all of the data is backed up in multiple other locations so this isn't that stressful)What is the best way to proceed? yosemite-diagnostics-20260820-0743.zip
August 20Aug 20 If the emulated disk is mounting and contents look correct, we typically recommend rebuilding.The other option would be to do a new config (Tools - New Config - Keep all) then reassign the disk, check "parity is already valid" and run a correcting parity check; a few sync errors are expected.
August 20Aug 20 Author Thanks for the reply. I double checked that the emulated disk is showing everything correctly and doubled checked my offsite backs. I stopped the array, selected the drive as disk 1 and started the array back up. It is rebuilding now.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.