Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Issues with drives. New setup from old computer

Featured Replies

Hi!
I'm working on setting up a new server from my old computer but encountering some issues with drives however none are reporting any SMART errors.
I have already ran a Memtest and extended SMART-test with no issues.

It started with one Disk drive giving warning after I setup, formated and started the array.
1x10TB Parity
2x10TB Disks
There is also an SSD and NVMe in the system but they are unassigned for now.

I excluded it from the array to troubleshoot and reinstalled everything and only used the two drives without errors and it seemed to work fine. Then I ran a full pre-clear on the drive that had reported errors and it comming back with no errors. I added it to the array again and was met with:
Drive 1: Unmountable: wrong or no file system
Drive 2: Unformated ... (And some more I forgot to save it)

I've ran file system fix on Drive 1 throught the GUI and it says it's fine until I try to start the array, and when I check again the file system is corrupted but gets fixed.

Adding diagonstics logs but the noticable errors I find are below.

I'm not sure what my next line of troubleshooting is to verify if the drives are bad or not. Since they show no SMART-errors and the pre-clear succeeded I believe there might be an issue with the motherboard since I had some corruption issues many many years ago with some HDDs but never SSDs.
The computer also has a brand new powersupply (Corsair 1000W). Another thought is the SATA cables but that should give more obvious errors I believe? Running a new partiy check now to see how it goes.

Thankful for any help!

Motherboard: MSI MPG X570 GAMING PLUS (MS-7C37) Version 2.0

CPU: AMD Ryzen 7 3700X 8-Core @ 3600 MHz
HVM: Enabled

IOMMU: Enabled

Cache: L1 - Cache: 512 KiB, L2 - Cache: 4 MiB, L3 - Cache: 32 MiB

Memory: 16 GiB DDR4 (max. installable capacity 128 GiB)

Network: bond0: fault-tolerance (active-backup), mtu 1500

Kernel: Linux 6.18.60-Unraid x86_64


Nov 13 22:37:48 ThisServer root: /dev/sde: 2 bytes were erased at offset 0x000001fe (dos): 55 aa
Nov 13 22:37:48 ThisServer emhttpd: shcmd (595): sgdisk -o -a 8 -n 1:32K:0 /dev/sde
Nov 13 22:37:48 ThisServer kernel: sde: sde1
### [PREVIOUS LINE REPEATED 1 TIMES] ###
Nov 13 22:37:49 ThisServer root: Creating new GPT entries in memory.
Nov 13 22:37:49 ThisServer root: The operation has completed successfully.
Nov 13 22:37:49 ThisServer emhttpd: shcmd (596): partprobe /dev/sde
Nov 13 22:37:49 ThisServer emhttpd: shcmd (597): udevadm settle
Nov 13 22:37:53 ThisServer emhttpd: shcmd (598): sleep 1
Nov 13 22:37:54 ThisServer emhttpd: disk2: recover volume
Nov 13 22:37:54 ThisServer emhttpd: /sbin/blkid /dev/md2p1 2>&1
Nov 13 22:37:54 ThisServer emhttpd: disk2: no file system or multiple signatures present
Nov 13 22:37:54 ThisServer emhttpd: /sbin/blkid /dev/sda1 2>&1
Nov 13 22:37:54 ThisServer emhttpd: /dev/sda1: LABEL_FATBOOT="UNRAID" LABEL="UNRAID" UUID="1234-5678" BLOCK_SIZE="512" TYPE="vfat"
Nov 13 22:37:54 ThisServer emhttpd: import 30 flash device: (/dev/sda1)
Nov 13 22:37:54 ThisServer emhttpd: shcmd (602): touch /boot/config/forcesync
Nov 13 22:37:54 ThisServer emhttpd: Mounting disks...
Nov 13 22:37:54 ThisServer emhttpd: mounting /mnt/disk1
Nov 13 22:37:54 ThisServer emhttpd: shcmd (603): mkdir -m 0666 -p /mnt/disk1
Nov 13 22:37:54 ThisServer emhttpd: shcmd (604): mount -t xfs -o noatime,nodiscard,nouuid /dev/md1p1 /mnt/disk1
Nov 13 22:37:54 ThisServer kernel: XFS (md1p1): Mounting V5 Filesystem 0ad8cd88-c06e-485a-bd22-310eda997d08
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Metadata CRC error detected at xfs_agi_read_verify+0x8a/0x100, xfs_agi block 0x37fffffd8 
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Unmount and run xfs_repair
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): First 128 bytes of corrupted metadata buffer:
Nov 13 22:37:55 ThisServer kernel: 00000000: 58 41 47 49 00 00 00 01 00 00 00 07 0f ff ff ff  XAGI............
Nov 13 22:37:55 ThisServer kernel: 00000010: 00 00 00 00 00 00 00 06 00 00 00 01 00 00 00 00  ................
Nov 13 22:37:55 ThisServer kernel: 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
Nov 13 22:37:55 ThisServer kernel: 00000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
Nov 13 22:37:55 ThisServer kernel: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Nov 13 22:37:55 ThisServer kernel: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Nov 13 22:37:55 ThisServer kernel: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Nov 13 22:37:55 ThisServer kernel: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): metadata I/O error in "xfs_read_agi+0xd1/0x140" at daddr 0x37fffffd8 len 8 error 74
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Error -117 reserving per-AG metadata reserve pool.
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Corruption of in-memory data (0x8) detected at xfs_fs_reserve_ag_blocks+0x88/0xf0 (fs/xfs/xfs_fsops.c:566).  Shutting down filesystem.
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Please unmount the filesystem and rectify the problem(s)
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Ending clean mount
Nov 13 22:37:55 ThisServer kernel: XFS (md1p1): Error -5 reserving per-AG metadata reserve pool.
Nov 13 22:37:55 ThisServer root: mount: /mnt/disk1: can't read superblock on /dev/md1p1.
Nov 13 22:37:55 ThisServer root:        dmesg(1) may have more information after failed mount system call.
Nov 13 22:37:55 ThisServer emhttpd: shcmd (604): exit status: 32
Nov 13 22:37:55 ThisServer emhttpd: shcmd (605): rmdir /mnt/disk1
Nov 13 22:37:55 ThisServer emhttpd: disk1: mount error: wrong or no file system
Nov 13 22:37:55 ThisServer emhttpd: mounting /mnt/disk2
Nov 13 22:37:55 ThisServer emhttpd: disk2: mount error: unsupported or no file system
Nov 13 22:37:55 ThisServer emhttpd: shcmd (606): /usr/sbin/zfs mount -a
Nov 13 22:37:55 ThisServer emhttpd: shcmd (607): sync
Nov 13 22:37:55 ThisServer emhttpd: shcmd (608): mkdir /mnt/user0
Nov 13 22:37:55 ThisServer emhttpd: shcmd (609): /usr/libexec/unraid/shfs /mnt/user0 -disks 6 -o default_permissions,allow_other,noatime 
Nov 13 22:37:55 ThisServer emhttpd: shcmd (610): mkdir /mnt/user
Nov 13 22:37:55 ThisServer emhttpd: shcmd (611): /usr/libexec/unraid/shfs /mnt/user -disks 7 -o default_permissions,allow_other,noatime -o remember=0 

thisserver-diagnostics-20261114-0004.zip

Edited by pukka

Putting log in text block is fine, and it is appropriate to not wrap log lines.

But please don't put your own text in a text block, it prevents it from wrapping so we have to scroll side-to-side.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.