15 hours ago15 hr ⚠️ PLEASE READ BEFORE USING THIS TEMPLATE ⚠️This template is a community contribution, provided as-is, free of charge, with no warranty of any kind. It is not affiliated with SDR-Enthusiasts, who build and maintain the Ultrafeeder container itself.Ultrafeeder (ADS-B) - Unraid CA templateThis is the support thread for my Unraid Community Applications template for Ultrafeeder by SDR-Enthusiasts: an all-in-one ADS-B receiver with readsb, a tar1090 live map, graphs1090 and multi-feeder/MLAT support.Project: https://github.com/sdr-enthusiasts/docker-adsb-ultrafeederTemplate and README: https://github.com/Eurotimmy/unraid-templates/tree/main/UltrafeederWhy I added itI feed Flightradar24, FlightAware and others from an RTL-SDR Blog V3 with a bias-tee powered LNA, using the thomx/fr24feed-piaware container. My reception was terrible, and it turned out the LNA had never been powered: that container switches the bias-tee on, then its dump1090 resets it a moment later when it opens the dongle (the log still says "SUCCESS: Bias Tee enabled"). An unpowered LNA blocks most of the signal. Ultrafeeder's readsb can hold the bias-tee on itself, and there was no Ultrafeeder template in CA, so I made one for anyone else in the same spot.Quick startPlug in your RTL-SDR and make sure no other container (dump1090, fr24feed-piaware, etc.) is using it.2. Install Ultrafeeder from CA and set your receiver latitude, longitude and altitude (e.g. 18m).3. Start it and open the WebUI (port 8080 by default). Graphs are at /graphs1090/.Bias-tee LNA tipIf you power an LNA/filter through the coax from an RTL-SDR Blog V3/V4, set Enable Bias-Tee = true AND add --enable-biastee to Extra readsb Arguments. Symptom of an unpowered LNA: very few aircraft and a noise floor that barely changes with gain.Already running fr24feed-piaware?Let Ultrafeeder own the dongle and point fr24feed-piaware at Ultrafeeder's Beast output on port 30005. You keep all your FR24/FlightAware feeds. The exact settings are in the README.Gain defaults to "auto" (readsb's built-in auto-gain, as recommended by SDR-Enthusiasts).Questions about the Unraid template go in this thread. Problems with the container or decoder itself are best raised with SDR-Enthusiasts on their GitHub.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.