Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Potential data loss after replacing disk

Featured Replies

I have potential data loss after the following:

1. Last week (Wednesday/Thursday) disk 1(ST6000NM0034_Z4D3G2S20000R621P1K1) reported errors and became disabled (it had also previously reported errors, so I ordered new drives and waited for them to arrive)

2. Automatic weekly parity ran on Monday morning which stopped part way through (30-40%) with errors on parity disk 1 (I have dual parity setup)

3. On Tuesday 11/17, I turned the server off and replaced disk 1 with a new drive

4. I turned the server on, stopped the array, rebuilt (the new) disk 1 (ST6000NM005B_WX00AT5W0000C2499Z4H) and (the old) parity 1 (I know that this step was likely the primary source of the issue)

5. Rebuild finished Tuesday night, when the rebuild was done I noticed that parity 1 had millions (billions?) of errors and no disk temp (reported as "*")

6. I stopped the array to rebuild parity 1 (didn't start the rebuild)

7. Then noticed disk 1 had a warning that it was "not formatted"

8. I followed the steps to "repair the filesystem" (XFS) (from https://docs.unraid.net/unraid-os/using-unraid-to/manage-storage/file-systems/#checking-a-file-system) , a corruption was reported and I clicked "Fix corruption" (here I noticed many lines printed)

9. I started the parity rebuild of parity 1

10. Then I noticed that most of the data was missing from disk 1, so I stopped the parity build at < 1% in and turned off the server

Note: I do still have the old disk 1, which had errors but I imagine most of the data is still on this old disk.

Also, when I turned on the server to collect the logs and cache device 2 (ST6000NM0054_Z4D38NTD) was reported missing, so I did not start the array to check the lost+found on the new disk 1.

Is it possible to recover any of the data from disk 1 (I assume this would need to be done using the old drive)? Is there a guide somewhere I can follow to do this? And where does fixing parity 1 and the missing cache drive fit into the process?

I've also attached the diagnostic log.

bebop-diagnostics-20261119-1212.zip

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.