Hey guys

 

Just wanted to get your expert advice on a failed preclear.

 

It's a Seagate 3tb Backup plus that I opened and put in my server.

 

A little backstory. I'm running Esxi with Unraid as a guest using both saslp-mv8 and m1015 passed through. Recently I doubled the Esxi memory (Unraid still rocking 2gb) and added the m1015. After the upgrade I did a Parity-check that went really smooth and today I wanted to pre-clear the new drive.

 

The syslog has been attached.

 

After this happened my array was fine except from the new drive. I could not run a smart test or talk to it in any way.

 

After a reboot I could get a smart test which is attached

 

I noticed that before the preclear the drive had  no Current_Pending_Sector or Offline_Uncorrectable. But after the reboot I can see 8 of each.

 

Since Its not a part of the array yet I'm not that worried.. but it would be nice to hear what you guys think. Hopefully I can still RMA it (if it's broken) considering it was an external drive and It was shipped to me on vacation in the US but now I'm back home in Europe

 

Just for fun I'm currently running "badblocks -wvsb 4096 /dev/sdk" on the broken drive.. but to be fair I don't know what thats is going to tell me

 

Thanks

Sys_smart.zip

badblocks is still running.. but now the same drive has 0 Current_Pending_Sector and 0 Offline_Uncorrectable

 

I really hope someone can give me some insight here.

 

My plan now is to see what happens with badblocks and then maybe another preclear. What do you guys think.

 

The new smart check is attached:

smart2.txt