February 11, 200917 yr Not sure if this belongs in this section or not. I have a new San Disk 8GB cruzer. I have used the instructions to the detail from the main lime site. Did both a full and quick format. Made sure the name was UNRAID. Downloaded syslinux.exe and did the -ma tag. Unzipped Unraid directly onto the stick. I have the intel board mentioned on the main site and set my BIOS accordingly to the settings listed there by Tom. It goes through the boot up process to the following. It does the mem test, then IDE Controllers, thne goes VERY quickly through a screen I cannot even see at all. Then beeps twice and does the 'No boot device' error message. Anyone have ANY ideas? I am going nuts here.
February 11, 200917 yr Sounds like your BIOS isn't looking at your flash drive as the boot device. Check http://lime-technology.com/wordpress/?page_id=19 under "Booting unRAID Server" for some pointers on cajoling the BIOS to boot from it.
February 11, 200917 yr Author Gosh I just noticed that one of the power supplies in the server is not working. It must have burned out! That cannot be helping the situation at all!
Archived
This topic is now archived and is closed to further replies.