peter_sm Posted September 20, 2014 Share Posted September 20, 2014 Hi. i have mounted a btrfs drive outside the array as my VM disk, now I see these errors ( a part of all ines ) ... how is the best way to solve this ... ? Sep 20 15:09:35 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:37 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:38 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:39 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:41 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:42 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:43 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:44 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:46 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:46 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:46 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:47 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:47 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:48 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:48 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:49 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:49 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:50 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:50 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:51 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:51 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:52 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:52 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:53 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:09:53 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:54 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:09:54 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984745984 csum 1154972746 expected csum 3286429079 (Errors) Sep 20 15:10:00 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:10:01 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Sep 20 15:10:02 Tower kernel: BTRFS error (device sdh1): csum failed ino 644985 off 12984700928 csum 1443839712 expected csum 2775656105 (Errors) Quote Link to comment
dgaschk Posted September 20, 2014 Share Posted September 20, 2014 See here: https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs-scrub Quote Link to comment
peter_sm Posted September 21, 2014 Author Share Posted September 21, 2014 That didn't help, still a lot of uncorrectable errors..... this disk was running perfect with RFS previuse, moved to btrfs last week, maybe move xfs for this as well and see what happens. Or the disk have gone bad? smartctl -a /dev/sdh smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.2-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Hitachi HTS541010A9E680 Serial Number: J8100019J1XWJA LU WWN Device Id: 5 000cca 6a0dd0fd2 Firmware Version: JA0OA4D0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Sep 21 07:33:17 2014 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 241) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 089 062 Pre-fail Always - 0 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0023 166 100 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3128 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 5660 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2207 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 096 000 Old_age Always - 343597449225 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 197572689922 190 Airflow_Temperature_Cel 0x0022 082 044 045 Old_age Always In_the_past 18 (Min/Max 16/18) 191 G-Sense_Error_Rate 0x0032 096 096 000 Old_age Always - 1239 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2555943 193 Load_Cycle_Count 0x0032 087 087 000 Old_age Always - 133523 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 9 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 occurred at disk power-on lifetime: 5571 hours (232 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 20 c0 ec 0e 00 Error: WP at LBA = 0x000eecc0 = 978112 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 10 b0 4c 70 40 08 1d+11:13:06.920 WRITE FPDMA QUEUED 61 00 08 b0 48 70 40 08 1d+11:13:06.914 WRITE FPDMA QUEUED 61 00 00 b0 44 70 40 08 1d+11:13:06.907 WRITE FPDMA QUEUED 61 00 f0 b0 40 70 40 08 1d+11:13:06.901 WRITE FPDMA QUEUED 61 00 e8 b0 3c 70 40 08 1d+11:13:06.894 WRITE FPDMA QUEUED Error 8 occurred at disk power-on lifetime: 5571 hours (232 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 20 a0 24 14 00 Error: WP at LBA = 0x001424a0 = 1320096 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 08 a0 b0 59 40 08 1d+11:12:52.015 WRITE FPDMA QUEUED 61 00 00 a0 ac 59 40 08 1d+11:12:52.008 WRITE FPDMA QUEUED 61 00 f0 a0 a8 59 40 08 1d+11:12:52.002 WRITE FPDMA QUEUED 61 00 e8 a0 a4 59 40 08 1d+11:12:51.995 WRITE FPDMA QUEUED 61 00 d8 a0 a0 59 40 08 1d+11:12:51.989 WRITE FPDMA QUEUED Error 7 occurred at disk power-on lifetime: 5571 hours (232 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 20 60 20 14 00 Error: WP at LBA = 0x00142060 = 1319008 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 38 b0 5c 30 40 08 1d+11:12:28.814 WRITE FPDMA QUEUED 61 00 30 b0 58 30 40 08 1d+11:12:28.808 WRITE FPDMA QUEUED 61 00 28 b0 54 30 40 08 1d+11:12:28.801 WRITE FPDMA QUEUED 61 00 20 b0 50 30 40 08 1d+11:12:28.795 WRITE FPDMA QUEUED 61 00 18 b0 4c 30 40 08 1d+11:12:28.787 WRITE FPDMA QUEUED Error 6 occurred at disk power-on lifetime: 5571 hours (232 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 20 00 82 09 00 Error: WP at LBA = 0x00098200 = 623104 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 e0 40 8c 17 40 08 1d+11:12:13.947 WRITE FPDMA QUEUED 61 00 d8 40 88 17 40 08 1d+11:12:13.940 WRITE FPDMA QUEUED 61 00 d0 40 84 17 40 08 1d+11:12:13.935 WRITE FPDMA QUEUED 61 00 c8 40 80 17 40 08 1d+11:12:13.927 WRITE FPDMA QUEUED 61 00 c0 40 7c 17 40 08 1d+11:12:13.922 WRITE FPDMA QUEUED Error 5 occurred at disk power-on lifetime: 5474 hours (228 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 00 e8 8b 41 00 Error: WP at LBA = 0x00418be8 = 4295656 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 88 a0 14 b6 40 08 00:59:08.354 WRITE FPDMA QUEUED 61 00 80 a0 10 b6 40 08 00:59:08.348 WRITE FPDMA QUEUED 61 00 78 a0 0c b6 40 08 00:59:08.343 WRITE FPDMA QUEUED 61 00 70 a0 08 b6 40 08 00:59:08.337 WRITE FPDMA QUEUED 61 00 68 a0 04 b6 40 08 00:59:08.332 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1721 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.